torque arm bracket/mount??
02-12-2005, 04:56 PM
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: Philly
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
torque arm bracket/mount?? is the torque arm mount/bracket the mount attached to the transmission and an M6 car?? and what do i need to do to replace it because i broke it yesterday. how expensive is it and how hard is it to replace....help asap because i need the car back soon and it is a bitch to drive now!!
02-13-2005, 08:20 AM
#3
TECH Fanatic
Join Date: Dec 2001
Location: MI
Posts: 1,060
Likes: 0
Received 0 Likes
on
0 Posts
Yes it's attached to the trans. and it's not that hard to change, you'll have to remove the bolt's at the rear first and slid the torque arm out off the bracket then reinstall the same way by bolting the bracket to the trans. and then slide the TQ arm into the mount and then bolt TQ to the rear end. Part's store might have the bracket but dealer ship will have one for sure and one of our sponsor's will have the poly or rubber insert for the bracket so check over there. >>>>>>>>>>>>>>>>>>>>>>>>>>>
02-13-2005, 04:00 PM
#5
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
BMR just came out with a new crossmember that takes the TA off the tranny tail shaft. there is a bit of info and a Pic of it here https://ls1tech.com/forums/suspension-brakes/273276-looking-buy-new-torque-arm.html .
Dan
Dan
