SLIKWS6

iTrader: (6)

or do before I install some lower control arm relocation brackets and lower control arms?
I ask because I dont want my rearend to be off center as I have read many times this has happened.
Anything that I shouldnt do?

Thanks any input would be highly appreciated

99trickin

pretty straight foward.i would recommend doing one side at a time,especially if you are using weld in brackets.

SLIKWS6

iTrader: (6)

The only reason I asked is because after reading many threads and whatnot, peoples rearends always tend to move out of center.

Thanks for your input though, its appreciated.

sikws6

If you use the BMR bolt-ons you don't have to worry! they locate off the shock mount, if your worried, you can weld them on also! hope this helps