Best LCA for handling?
If it's a track-only car and you don't mind the noise, quality hem-joints on both ends are the way to go. Otherwise heim on the axle and rubber on the frame seems to offer the best of both worlds.
Thread Starter
TECH Fanatic
Joined: Aug 2003
Posts: 1,130
Likes: 1
From: Tranås, Sweden
Originally Posted by JimMueller
If it's a track-only car and you don't mind the noise, quality hem-joints on both ends are the way to go. Otherwise heim on the axle and rubber on the frame seems to offer the best of both worlds.
Trending Topics
Staging Lane
Joined: Dec 2003
Posts: 60
Likes: 0
From: Los Angeles
Anyone use Rubber bushings? Do any venders sell Heim/rubber LCA's? I know LG sells the Heim/Poly LCA's which I have, but I'd like to try a set that uses a rubber bushing instead of poly. The squeeky noises the poly bushings make is too much for me. A while back there was a member who made his own heim/rubber LCA's, wonder how those worked out for him.
Thanks!
Thanks!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Actually trackbird made some for the community, here and over at frrax. Don't know if he makes them anymore, however there is a member who started a thread in order to ensure he get's the parts for his rubber/heim LCA's correct.
Here's a thread from his website:
http://frrax.com/rrforum/index.php?act=ST&f=3&t=4086&
(Disclaimer: Any reading, performance, and results of so are sole responsibility of the end user as I am not liable for any errors or results of errors. Also if you shall post there, post with discretion.)
Here's a thread from his website:
http://frrax.com/rrforum/index.php?act=ST&f=3&t=4086&
(Disclaimer: Any reading, performance, and results of so are sole responsibility of the end user as I am not liable for any errors or results of errors. Also if you shall post there, post with discretion.)
