I installed my UMI LCAs yesterday...... I have alot of noise....
#21
I just pumped some grease into the Poly bushing and also on the side and even on the inside of it where the bolt goes through.....
I didnt have a torque wrench so I just did them very thight
Ohh also, Get blue locktite and apply some of it on the adjuster nut and it wont back off at all.
I been purposely going into very bumpy roads to see if it will loosen up and nothing...
Good luck for anyone doing this on their car!
I didnt have a torque wrench so I just did them very thight
Ohh also, Get blue locktite and apply some of it on the adjuster nut and it wont back off at all.
I been purposely going into very bumpy roads to see if it will loosen up and nothing...
Good luck for anyone doing this on their car!
#22
Retighten the bolts and put some grease on the bushings. I daily drive my car and I went 6 months before they started to make noise. I really only hear them when the windows are down now but I ordered some new rod ends and I'll put them on this week.
#24
Originally Posted by 01 Red WS6
Retighten the bolts and put some grease on the bushings. I daily drive my car and I went 6 months before they started to make noise. I really only hear them when the windows are down now but I ordered some new rod ends and I'll put them on this week.
#26
Originally Posted by joblo1978
Mine are noisy, they are lubed and tight. But boy the traction is worth it. I love how the right rear of the car just squats when I nail it now.
Well at least thats a good trade off