help with spring selection
Thread Starter
TECH Fanatic
iTrader: (70)
Joined: Oct 2005
Posts: 1,219
Likes: 0
From: Los Angeles, California (818)
help with spring selection i need help with what kind of springs i should get to drop my car about 1 inch, but i need them to be i want them to be have a very comfortable ride, oh and there going on my 98 z28,
Trending Topics
I have ground control coil overs. U can pick the spring rate. You can also set the ride height. I like them alot. They can be had for 360.00 from the WS6 store. When u up the spring rate u will need better shocks. Get the koni SA and put it all on at the same time. If you what to go that way ask for help on the spring rate.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Hotchkis... for a number of reasons including working spring rate, and acutally lowering as opposed to the "approximate" lowering.
Other option for around 1" (actually more like 1.25") would be LT1 Pro-kits. Sounds strange, but works extremely well, and are excellent springs.
SLP cars are not lowered an inch (not usually the 3/4" they "supposedly" are, but close).
Other option for around 1" (actually more like 1.25") would be LT1 Pro-kits. Sounds strange, but works extremely well, and are excellent springs.
SLP cars are not lowered an inch (not usually the 3/4" they "supposedly" are, but close).
__________________
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
Originally Posted by YellowToy/A
I have ground control coil overs. U can pick the spring rate. You can also set the ride height. I like them alot. They can be had for 360.00 from the WS6 store. When u up the spring rate u will need better shocks. Get the koni SA and put it all on at the same time. If you what to go that way ask for help on the spring rate.
Would this be a good handling setup? On my 96 V6 I put 1LE springs/shocks/sways and it made a world of difference. My 00Z is stock except for KB SFC & KB STB.
