relocation brackets
TECH Enthusiast
Joined: Jan 2002
Posts: 559
Likes: 0
From: West Monore
Re: relocation brackets It is my understanding that Global West makes relocation brackets that have to be welded in place. This may be the answer to your question. Call one of the sponsors such as Thunderracing and get there advice--I believe this vendor carries the Global West Reloc. brackets. Good luck.
TECH Apprentice
Joined: Nov 2001
Posts: 392
Likes: 0
From: Williamsburg, VA
Re: relocation brackets I made up a set and welded them on my Moser 12 bolt. You might want to talk to the gruff folks at your local machine shop and have them fab up a set and then weld them on.
<small>[ July 08, 2002, 08:37 PM: Message edited by: Brother J ]</small>
<small>[ July 08, 2002, 08:37 PM: Message edited by: Brother J ]</small>
Re: relocation brackets 
TECH Addict
Joined: Dec 2001
Posts: 2,340
Likes: 0
From: Fort Worth,TX
Re: relocation brackets </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by bigSS:
<strong>Ok, who here has a Moser 12bolt and LCA relocation brackets? I just had to sell my LG ones because they wouldn't fit. What brand should I buy?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">If they push your rearend back then you may need a longer driveshaft.
<strong>Ok, who here has a Moser 12bolt and LCA relocation brackets? I just had to sell my LG ones because they wouldn't fit. What brand should I buy?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">If they push your rearend back then you may need a longer driveshaft.
Trending Topics
Re: relocation brackets </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by bigSS:
<strong>BeaSSt - I assume you have a 12bolt?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I have used them on both, my old 12 bolt and my current 9" setup.
Dave
www.thebeasst.com
<strong>BeaSSt - I assume you have a 12bolt?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I have used them on both, my old 12 bolt and my current 9" setup.
Dave
www.thebeasst.com
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
