Torque Specs UMI Bolt-in LCA relo brackets
10-26-2006, 11:45 PM
#1
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Sep 2004
Location: Deland, Florida
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
Torque Specs UMI Bolt-in LCA relo brackets I lost my instructions, what are the bolts <upper/lower> supposed to be torqued to? I recall the control arms are supposed to be torqued to 72 ft/lbs, but I don't know about the upper bolt that holds the relo bracket to the car.
Thanks!
Thanks!
10-27-2006, 09:22 AM
#2
Hello,
Yes torque the control arm bolts to 72 ft lbs. The upper bolts are not critical, they just hold the bracket in place and the spacer, just make sure they are very tight, 50 ft lbs would be good on them.
Anything else just let me know. Thanks!
Ryan
Yes torque the control arm bolts to 72 ft lbs. The upper bolts are not critical, they just hold the bracket in place and the spacer, just make sure they are very tight, 50 ft lbs would be good on them.
Anything else just let me know. Thanks!
Ryan
