Tubular lower A-arms not holding front end alignment
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: Texas
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Tubular lower A-arms not holding front end alignment
Has anyone had this problem:
I have a 2002 Trans Am with Spohn Tubular upper and lower A-arms. I can't get the thing to hold a front end alignment for more than a week. This has been going on for a long time. It gets aligned fine, then after a few days it moves. I'm just driving to and from work. Not any curb checks or anything. They are tightned down to 100 ft. lbs. The lower ones have rod ends. Any ideas?!
<-------- that's me with this problemo!
I have a 2002 Trans Am with Spohn Tubular upper and lower A-arms. I can't get the thing to hold a front end alignment for more than a week. This has been going on for a long time. It gets aligned fine, then after a few days it moves. I'm just driving to and from work. Not any curb checks or anything. They are tightned down to 100 ft. lbs. The lower ones have rod ends. Any ideas?!
<-------- that's me with this problemo!