billybadd

iTrader: (21)

Installed LCA's, relo brackets, panhard "on car" adjust., and subframe connectors yesterday. Took it to the track last night and spun the tires hard, but no wheel hop like before. Guess it is putting more to the ground. Only thing ive noticed as far as problems is a "clunk" noise sometimes when I'm turning.

I ran 2 tenths slower with shitty nitto drags and zero track preperation. ET streets will be mounted this week and Ill try again.

Any ideas as far as the noise?

SpdFrk1990

iTrader: (6)

As far as the clunk was everything torqued and greased? You still running the stock torque arm?

2_wacko

iTrader: (2)

I have the clunk its from the Rod Ends.

billybadd

iTrader: (21)

Yeah its a stock tq arm. May be the rod ends.
bushings were greased and everthing was torqued.

SpdFrk1990

iTrader: (6)

What lca's did you get from what company?

billybadd

iTrader: (21)

They are UMI parts.

SpdFrk1990

iTrader: (6)

UMI rod ends should not clunk.

billybadd

iTrader: (21)

Ill recheck the bolts in the morning.

UMI Performance

iTrader: (77)

Tighten the front control arm mount where the SFC's mount. With the SFC's being there this area needs to be torqued more to compress the bushing, try 90 ft lbs in these area. This is also in the installation instructions