Line Lock Switch install locations
02-16-2008, 07:25 AM
#2
TECH Resident
iTrader: (21)
Join Date: Sep 2005
Location: New Jersey
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
Mine is temporarily mounted where the ashtray lid used to be. My lid was missing so I fabbed a piece to cover it. It works well but I have a new console with a lid so it's moving soon. I've seen them mounted everywhere though, on the shifter itself, on the driver's seat by the power controls, on the console on a plate that covers that little holder, and sometimes even under the knee panel by the trunk release button. I prefer a location by the shifter within easy reach but not in the way of daily driving.
02-16-2008, 11:08 AM
#3
TECH Resident
iTrader: (3)
Join Date: May 2006
Location: Enid, OK
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
The original owner of my car had an SLP line lock and the switch was mounted on the left hand side of the steering wheel. But he got it cought on some loose clothing when getting out of the car and ripped it right off! There has been a hunk about the size of a quarter missing from my wheel since the day I bought it 
02-19-2008, 08:33 AM
#7
TECH Regular
iTrader: (5)
Join Date: Nov 2001
Location: Washington Crossing, PA
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
I ran it to the left side of the footwell and connected it to a coiled, momentary transbrake button with a weatherpack connector. When in use, I just hang it with a tie-wrap on the left-side, dash vent. When not in use, I can disconnect it and hide the cable underneath the dash.
