Big Bird WS6

iTrader: (9)

i don't know a sponsor that does. but i know a company that does.

and let me tell you they work great. got them on the car now.

just alittle different then the ones in the pic

leadfoot4

iTrader: (1)

Are you referring to the "Johnny Joint"?

99Bluz28

iTrader: (35)

This is where I found those at:
http://www.ballisticfabrication.com/...FSEbagodigKulQ

They do have some that are almost the right size, but there a little on the big side.
I'm interested in any links related to this you might have Big Bird WS6

Big Bird WS6

iTrader: (9)

well yes and no

if interested pm me. i ain't getting kick off forum.

also i know this company will be sponsor shortly. so i aint saying anything on the forum

leadfoot4

iTrader: (1)

I looked into the "JJ" a couple of years ago, when I fabbed my own LCAs. But, as I said, the lack of compliance in that type of bushing, while good for handling, is too "solid" for the roads of western New York, so I passed on them...

Big Bird WS6

iTrader: (9)

they poly is rated a 85 D.

most of the poly bushing that sponsors on here use is between 80 to 95 D

so idk what you mean by to stiff.

either way. the roads of IOWA suck. and these work great on my car. should have a torque arm done real soon. but either way if you want any info. just PM me.