FS: C5 1 7/8 Kooks, Intake, CNC Heads, Cray Wheels, Cowl Hood, JESELS, Pushrods, Subs
10-21-2008, 02:16 AM
#1
LS1TECH Sponsor
Thread Starter
Join Date: Sep 2004
Location: Houston
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
FS: C5 1 7/8 Kooks, Intake, CNC Heads, Cray Wheels, Cowl Hood, JESELS, Pushrods, Subs Parting out my Z06. I have these parts for sale:
Kooks 1 7/8 Stainless headers with ORX Pipe - 6 months old but car barely driven- $880
Yella Terra Ultra Light 1.8 Ratio Roller Rocker arms - Installed, driven to the Dyno, then driven back home...ALMOST NEW - $400
ET Performance CNC Machined 5.3 Truck Castings Designed for 4.060 Bore or smaller - Flow 329 @ 600 LIFT - 230CC Port Volume - Made 520 on my 408 6 speed car and 477 Just Heads and Cam - $1100
AFE Cold Air Induction - 200 miles - Designed for C5's with 85mm MAF - $200
Comp 7.350 Hardened Chromoly Pushrods - $85
Jesel Sportsman 1.7 ratio Shaft mount Non Adjustable roller rocker arms - $525
C5 Custom 3.5 inch Cowl Hood Painted black - Pics Upon Request - $800
Cray Manta Wheel Set Chrome - 19's and 20's - Wheel and tires are literally 350 miles old - $2250
Custom Speaker box with 4 Kicker 6.5inch subs and PPI 1000 amplifier- Very lightweight and comes with wiring and adapter harness to install on OEM Head Unit - Pics Upon Request - $840
OEM Automatic 3.08 Rear Differential - $300
ALL PARTS ARE IN IMPECCABLE SHAPE!!! PRICES ARE RELATIVELY FIRM BUT WILL ENTERTAIN ALL OFFER OR TRADES...THANKS!!!
Kooks 1 7/8 Stainless headers with ORX Pipe - 6 months old but car barely driven- $880
Yella Terra Ultra Light 1.8 Ratio Roller Rocker arms - Installed, driven to the Dyno, then driven back home...ALMOST NEW - $400
ET Performance CNC Machined 5.3 Truck Castings Designed for 4.060 Bore or smaller - Flow 329 @ 600 LIFT - 230CC Port Volume - Made 520 on my 408 6 speed car and 477 Just Heads and Cam - $1100
AFE Cold Air Induction - 200 miles - Designed for C5's with 85mm MAF - $200
Comp 7.350 Hardened Chromoly Pushrods - $85
Jesel Sportsman 1.7 ratio Shaft mount Non Adjustable roller rocker arms - $525
C5 Custom 3.5 inch Cowl Hood Painted black - Pics Upon Request - $800
Cray Manta Wheel Set Chrome - 19's and 20's - Wheel and tires are literally 350 miles old - $2250
Custom Speaker box with 4 Kicker 6.5inch subs and PPI 1000 amplifier- Very lightweight and comes with wiring and adapter harness to install on OEM Head Unit - Pics Upon Request - $840
OEM Automatic 3.08 Rear Differential - $300
ALL PARTS ARE IN IMPECCABLE SHAPE!!! PRICES ARE RELATIVELY FIRM BUT WILL ENTERTAIN ALL OFFER OR TRADES...THANKS!!!
Last edited by 1Hawk; 10-23-2008 at 09:06 PM.
10-22-2008, 01:21 AM
#7
LS1TECH Sponsor
Thread Starter
Join Date: Sep 2004
Location: Houston
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
I like your hood...Chuck and I picked that thing out back in the day! The hood i have didnt exist at the time the Stinger was invented. You are more than welcome to buy mine though!!!
Trending Topics
10-23-2008, 12:29 AM
#11
LS1TECH Sponsor
Thread Starter
Join Date: Sep 2004
Location: Houston
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
The hood is pictured above on the black zo6
the front tires are 275's
the rears are 295's
10-23-2008, 04:04 PM
#13
LS1TECH Sponsor
Thread Starter
Join Date: Sep 2004
Location: Houston
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
10-24-2008, 01:17 PM
#18
LS1TECH Sponsor
Thread Starter
Join Date: Sep 2004
Location: Houston
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
ET Has flow numbers on their website for the 3.900 bore version of these heads these are designed to accomodate up to a 4.060 bore. The port design is a little different and so are the combustion chambers. They are about 10cfm higher on each side...i dont have flowsheets personally...I have Dyno Graphs....and thats the important thing right!
10-25-2008, 02:10 PM
#20
LS1TECH Sponsor
Thread Starter
Join Date: Sep 2004
Location: Houston
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts