FS- LS6 243 Heads with 921 springs
#1
FS- LS6 243 Heads with 921 springs
I picked these up from a fellow member and I'm considering a slightly different route. I have too much going on to jack with these right now. They are ready to bolt on for the additional HP over the stock LS1 heads or you can have them ported for a little more HP. I have a good hook up on port work/milling if needed. These are the actual ZO6 heads with the sodium filled valves. They already have low mileaged (appx 8000) Comp 921 springs installed on them.
I'll sell them for $500.00. Please don't bother with lower offers. If they don't sell, I will just keep them until I'm ready to start my new project. I've seen several people post looking for these, so I thought I'd make them available for someone that needs them now.
I'll sell them for $500.00. Please don't bother with lower offers. If they don't sell, I will just keep them until I'm ready to start my new project. I've seen several people post looking for these, so I thought I'd make them available for someone that needs them now.
Last edited by TXCAMSS; 05-13-2009 at 07:07 PM.