Weld draglite package 2-3.5" & 4-10" with tires
#1
Teching In
Thread Starter
Join Date: Jun 2006
Location: Austin
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Weld draglite package 2-3.5" & 4-10" with tires
Weld Racing Drag Lite-fronts (1 set)
2- Aluminum, Polished, 15 in. x 3.5 in., 5 x 4.5/ 4.75 in. Bolt Circle, 1.75 in. Backspace
2- ET Front Drag, 26 x 4.5-15, Bias-Ply, Tubeless, Outlined White Letters
Weld Racing Drag Lite-rears (2 sets)
4- Aluminum, Polished, 15 in. x 10 in., 5 x 4.5/ 4.75 in. Bolt Circle, 7.5 in. Backspace
4- ET Drags, LT 28 x 11.5-15, Bias-Ply, Blackwall
4- Tube, 15-16 in. Diameter Wheel, 28-30 in. Diameter Tire, 11.5-12.5 in. Tread Width
4- Lug Nuts, Shank with Washer, 12mm x 1.50 RH, Open End, Chrome Plated Steel
Lot's of tread left on all 4 ET drags. I have been told this will work with F-body. If not please delete this post.
$1500 well over $2600 invested.
chris@boostlogic.com or 512-371-9950 (shop)