FS: HSW LS1 Nitrous Plate Kit everything you need, w/guage, & microedge(ex) $500obo
03-08-2010, 12:46 PM
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Rockwall
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
FS: HSW LS1 Nitrous Plate Kit everything you need, w/guage, & microedge(ex) $500obo Have a 78mm Plate kit from Harris Speed works. Comes complete with EFI Interface tuner / controller that automatically retards timing and increases fuel according to jetting being used for a perfect nitrous tune everytime it is engaged. This kit is awesome. Comes with everything needed Bottle, Stainless lines, solenoids, nitrous plate, all wiring, bottle brakets, all jets for 50-200 hp shot, nitrous pressure guage mounted on bottle, Switch for engagement, $500
In addition I have an autometer Ultra lite nitrous pressure guage I will let go for $50 and a HSW microedge interface that has electronic controlled window switch, 1 or 2 stage nitrous controll, programable gear lock outs, delays, air fuel readout, rpm readout, voltage readout, Throttle position sendor for accutrate wide open throttle engagement etc. Sells brand new for $159 Ill let go for $99 or with kit $75.
My loss is your gain. I am going turbo so have no use for this setup anymore. Everything is Flawless and solenoids and electronics still are under warranty from HSW!! feel free to email or call in interested pbee78@yahoo.com 469-386-3500 Phillip.
In addition I have an autometer Ultra lite nitrous pressure guage I will let go for $50 and a HSW microedge interface that has electronic controlled window switch, 1 or 2 stage nitrous controll, programable gear lock outs, delays, air fuel readout, rpm readout, voltage readout, Throttle position sendor for accutrate wide open throttle engagement etc. Sells brand new for $159 Ill let go for $99 or with kit $75.
My loss is your gain. I am going turbo so have no use for this setup anymore. Everything is Flawless and solenoids and electronics still are under warranty from HSW!! feel free to email or call in interested pbee78@yahoo.com 469-386-3500 Phillip.
Last edited by ls1redline; 06-01-2010 at 04:55 PM.
