Fast90/90/HSW stand alone/NXL fogger/Longtubes/Nitrous/4l80e swap/A2w ice tank Fbody
04-06-2010, 06:18 AM
#1
Fast90/90/HSW stand alone/NXL fogger/Longtubes/Nitrous/4l80e swap/A2w ice tank Fbody ported fast 90/90 950 (thought tony mamo did it but he didnt...unsure of porter but picked up 20hp over my ls6)
nxl fogger hardlined with huge nx trashcan n2o noid and 2 n20 dave fuel noids...750
hsw stand alone only run racegas in it...very little run time...575
2 dynotune high output black heaters 50 each
2 bottle 2 stage nozzel kit from nitro dave...-6 upgrade and extra bottle...1000 plus the upgrades made it 1150...will sell for 950
nitrous outlet dual stage window...110
stainless steel tig welded headers with egr welded up and dual 3 inch y pipe into a single 4 inch, tucks well!...400
tci flywheel ls1...200
slp under drive balancer...170
brand new yank ss3600...700
ls1 head studs used once...270
ls6 ported oil pump...100
set of powdercoated black NOS bottlw brackets...30
odyssey pc680 battery...used 1.5 years...still great condition...90?
34 pound flow matched injectors...200
4l80e out of a 2000+ truck with 22k on it
yank stall new installed in my car it runs and drives but ive been waiting on a tune and im thinking about going with a glide, stall is a 3600 same as mightymouse off of here made for high horsepower cars was
and a 80e driveshaft yoke chromoly 1350 joint
and a 80e transmission crossmember from bmr hammertone black
and an extra vss plug and wires to run to your computer to make this work with wiring diagram
also have custom made fittings for the tranny for -6an tranny lines and liines if wanted for extra
tranny...800
converter...900 +shipping
80e yoke...75 +shipping
80e crossmember...170 +shipping
extra vss plug and tranny fittings made into -6an...35
will sell it all for 1800
or trade for glide/converter/shifter to match
all this has 0 miles on it...
100% complete swap...
ive got an ice tank that fits in the back of a fbody either on the top of the gas tank or down in the ttop well. You can use this to cool your intercooler, transmission, or both.
Features:
CONTRUCTED FROM 6061T6 .090 ALUMINUM
100% TIG WELDED
1" or 1-1/4" FEMALE NPT IN/OUT FITTNGS & -12 an fittings
1/2" FEMALE NPT DRAIN FITTING
Two 6" black SCREW OUT LID WITH HANDLE FOR EASY ICE FILLING
ANTI CLOG FILTER
MOUNTING TABS
IN TANK WATER PUMP DESIGN USING RULE 2000 WATER PUMP
9x9x30= 10gallons
The IAT on the car were 0f 50 degrees running this tank with twin 76's at 30 psi..
pm me for pictures, id like to move this thing fast
$350
picture in this link
https://ls1tech.com/forums/parts-cla...l#post13144930
nxl fogger hardlined with huge nx trashcan n2o noid and 2 n20 dave fuel noids...750
hsw stand alone only run racegas in it...very little run time...575
2 dynotune high output black heaters 50 each
2 bottle 2 stage nozzel kit from nitro dave...-6 upgrade and extra bottle...1000 plus the upgrades made it 1150...will sell for 950
nitrous outlet dual stage window...110
stainless steel tig welded headers with egr welded up and dual 3 inch y pipe into a single 4 inch, tucks well!...400
tci flywheel ls1...200
slp under drive balancer...170
brand new yank ss3600...700
ls1 head studs used once...270
ls6 ported oil pump...100
set of powdercoated black NOS bottlw brackets...30
odyssey pc680 battery...used 1.5 years...still great condition...90?
34 pound flow matched injectors...200
4l80e out of a 2000+ truck with 22k on it
yank stall new installed in my car it runs and drives but ive been waiting on a tune and im thinking about going with a glide, stall is a 3600 same as mightymouse off of here made for high horsepower cars was
and a 80e driveshaft yoke chromoly 1350 joint
and a 80e transmission crossmember from bmr hammertone black
and an extra vss plug and wires to run to your computer to make this work with wiring diagram
also have custom made fittings for the tranny for -6an tranny lines and liines if wanted for extra
tranny...800
converter...900 +shipping
80e yoke...75 +shipping
80e crossmember...170 +shipping
extra vss plug and tranny fittings made into -6an...35
will sell it all for 1800
or trade for glide/converter/shifter to match
all this has 0 miles on it...
100% complete swap...
ive got an ice tank that fits in the back of a fbody either on the top of the gas tank or down in the ttop well. You can use this to cool your intercooler, transmission, or both.
Features:
CONTRUCTED FROM 6061T6 .090 ALUMINUM
100% TIG WELDED
1" or 1-1/4" FEMALE NPT IN/OUT FITTNGS & -12 an fittings
1/2" FEMALE NPT DRAIN FITTING
Two 6" black SCREW OUT LID WITH HANDLE FOR EASY ICE FILLING
ANTI CLOG FILTER
MOUNTING TABS
IN TANK WATER PUMP DESIGN USING RULE 2000 WATER PUMP
9x9x30= 10gallons
The IAT on the car were 0f 50 degrees running this tank with twin 76's at 30 psi..
pm me for pictures, id like to move this thing fast
$350
picture in this link
https://ls1tech.com/forums/parts-cla...l#post13144930
Last edited by daniel6718; 04-12-2010 at 01:37 AM.
