Chrismikeb

iTrader: (2)

I would love to know the offset of these wheels the fitment looks perfect

00pooterSS

iTrader: (40)

Oops I meant can lol.

Thanks for the vouch. You can see in the pics in the sink some of the reflection that they have when in good light, even better in the sun.



I honestly forgot the measurements off the top of my head, I can get them tomorrow after I get off work though.

00pooterSS

iTrader: (40)

Would you be wanting to put them on an F Body? The fitment is perfect for 4th gen F bodies since that is what they were made for

00pooterSS

iTrader: (40)

Here are pics of the final step of the barrel install.

Pics are of me putting on masking tape so that I can lay down the silicone, wheels are now finished and cleaned up.







And a couple of more pics just because

00pooterSS

iTrader: (40)

Still haven't got measurements didn't get home till nearly 8 tonight and have been busy since. If you really need the measurements PM me and I will get them when I get some time.

00pooterSS

iTrader: (40)

Here you go!

jaysan

iTrader: (8)

I'll give $80 for that hundo dalla bill

Sick wheels and pm sent

00pooterSS

iTrader: (40)

Chit datz a rizzeal hunnud foo!

But you can have the big face and the wheels for $2300, I won't even haggle you at all

Chrismikeb

iTrader: (2)

^^^ haha
I don't NEED to know the offsets it would be nice to know so I'll know what the perfect offset is when I'm ready to buy some new rims...I guess they don't have it marked on the inside like cheapo 1 piece wheels lol

00pooterSS

iTrader: (40)

No they aren't marked like a lot of wheels are, I actually have to get out a ruler, a straight edge, and do a lot of calculations to get the offset's. The backspacing is really easy to figure but the offset is a bit of a challenge.

turbo

iTrader: (10)

Just call up Fikse and ask what off sets they use for 17x11s and 17x9.5s for F-Bodies....

00pooterSS

iTrader: (40)

That would be a much better option, less work for me

And whatever offset and backspacing they use is absolutely perfect. These wheels couldn't fit better..

turbo

iTrader: (10)

That's for sure, mine fit perfect as well. Rears look mean!

00pooterSS

iTrader: (40)

Its funny I ran a set of chrome Gran Sports that were 11's in the rear also and sat out a hair wider too, but never brought the attention the Fikse's did, I have been approached so many times about the stance the car has with these wheels, I had a lot of people pull up beside me and ask questions while driving down the road, people in just regular every day cars. They definately bring a lot of attention. Surprisingly more than wheels that are just as shiny and wide but not the exact same.

00pooterSS

iTrader: (40)

Bumppppp

00pooterSS

iTrader: (40)

Did you tear into yours yet??

I want to see the outcome of some custom colored center section FM10's

Or you could just trade them to me and some cash for mine

Donohue96M6Z28

iTrader: (64)

Make me a deal bro. Still have cash in hand.

turbo

iTrader: (10)

No, I haven't. Concentrating on the motor now and finding a job since I recently lost mine....which leads to not having cash for trading lol.

Once tue motor is back in the car and tuned I will get to the wheels and body of car, providing I have a job! :-)

ls1redline

iTrader: (3)

Bump for a good buddy and absolutley gorgeous 99.9% flawless wheels. People please remember these wheels MSRP for $3500+ this is a great deal!!!!

00pooterSS

iTrader: (40)

When I went to my insurance company to insure them they looked up the retail value on them and it was around $3600, not including shipping, lug nuts, blah blah.

Thanks for the vouch though P. Your car looked sweet yesterday it has came a long way since you got it man.