LS3 Coupe Mustang for sale...
#33
Thread Starter
TECH Apprentice
iTrader: (94)
Joined: Oct 2005
Posts: 300
Likes: 0
From: Huffman, Texas
It has a 10an line from the tank that is going to the pump and from the pump it is 8an that connects to a y block behind the motor. From there 2 8an lines goes to the back of the fuel rails and I ran an 8an crossover on the front of the rails into the regulator. On the bottom of the regulator there is a 6an going back to the tank.
85mmTB with an adaptor plate to work with the 90mm intake.
85mmTB with an adaptor plate to work with the 90mm intake.
#34
Ok cool. Im guessing the motor is 58x does the roller come with 58x to 24x converter. Im really intrested in the car. Just debating roller or complete as im pulling my 2008 ls2 and 4l70 out of my tbss.
#35
Thread Starter
TECH Apprentice
iTrader: (94)
Joined: Oct 2005
Posts: 300
Likes: 0
From: Huffman, Texas
All I'm going to do is pull the complete motor and transmission out and leave everything there. I will disconnect the the fuel at the y block...
All you will need to get it going would be a complete motor, transmission... For $500.00 + parts I will put your motor in the car.
#36
Who built the trans?
Ok only one more question what style computer and harness are you using 99+.
I think I would want it complete i have 80% of it I just need to get rid of some of these parts I have. Unless you need a fast 92, an edlebrock pro flo with rails, beck sheet metal intake, or c5 drag car roller with powerglide swap.
Ok only one more question what style computer and harness are you using 99+.
I think I would want it complete i have 80% of it I just need to get rid of some of these parts I have. Unless you need a fast 92, an edlebrock pro flo with rails, beck sheet metal intake, or c5 drag car roller with powerglide swap.
Last edited by LSX-coupe; 04-01-2011 at 02:56 PM.
#39
Thread Starter
TECH Apprentice
iTrader: (94)
Joined: Oct 2005
Posts: 300
Likes: 0
From: Huffman, Texas
Who built the trans?
Ok only one more question what style computer and harness are you using 99+.
I think I would want it complete i have 80% of it I just need to get rid of some of these parts I have. Unless you need a fast 92, an edlebrock pro flo with rails, beck sheet metal intake, or c5 drag car roller with powerglide swap.
Ok only one more question what style computer and harness are you using 99+.
I think I would want it complete i have 80% of it I just need to get rid of some of these parts I have. Unless you need a fast 92, an edlebrock pro flo with rails, beck sheet metal intake, or c5 drag car roller with powerglide swap.
The harness is an aftermarket harness with a 2001 Computer.
I have a guy coming on Sunday to look at the car. I will up-date this thread...