1999 corvette frc
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Nov 2013
Location: Danbury, TX
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
1999 corvette frc
I put this in the other classifieds but thought id put it here too.
1999 corvette frc coupe with black interior. Has about 114k miles and the heads and cam have less than 1k on them. Was a six speed but i swapped an auto. Mods are stock bottom end with cnc ported heads. Flycut pistons, arp head bolts, and comp pushrods. Shorty headers cat less mid pipe with z06 titanium exhaust. Ls6 intake, 36 lb FAST injectors and 85 mm bbk throttle body. Nitrous outlet plate system with 10lb bottle that is full and nx maximizer 4 digital controller. I have never used the nitrous yet. Trans is a 4l60 from an 04 vette with 60k miles on it with a 3.42 diff and a yank 3600 convertor. I have two sets of wheels one set of 17" 96 grand sport wheels and one set of racestar wheels currently on it. 17x4.5 front with hoosiers and 17x9.5 rear with nitto o5r drag radials. Wheels and front tires have less than 1k on them. Front were custom machined to get the right backspacing since racestar dosent sell them with the correct backspacing for a vette. This car is very low.
the bads that i know of are the front and rear bumper covers and the mirrors could use a repaint due to paint chipping.
the car also could stand some more tuning. I have the hp tuners but im limited on time so tuning takes me forever.
i will sell the car as it is. Or i can have it tuned elsewhere. Ill sell with one set of wheels or both. I can remove the heads and cam and reinstall the stock heads and smaller cam i have.
15k with everything, 2 sets of wheels. Both sets of heads and cams and tuner.
13k with stock heads and smaller cam installed.
16.5k with a wood floor car hauler that i used 3 times.
832 258 1300
1999 corvette frc coupe with black interior. Has about 114k miles and the heads and cam have less than 1k on them. Was a six speed but i swapped an auto. Mods are stock bottom end with cnc ported heads. Flycut pistons, arp head bolts, and comp pushrods. Shorty headers cat less mid pipe with z06 titanium exhaust. Ls6 intake, 36 lb FAST injectors and 85 mm bbk throttle body. Nitrous outlet plate system with 10lb bottle that is full and nx maximizer 4 digital controller. I have never used the nitrous yet. Trans is a 4l60 from an 04 vette with 60k miles on it with a 3.42 diff and a yank 3600 convertor. I have two sets of wheels one set of 17" 96 grand sport wheels and one set of racestar wheels currently on it. 17x4.5 front with hoosiers and 17x9.5 rear with nitto o5r drag radials. Wheels and front tires have less than 1k on them. Front were custom machined to get the right backspacing since racestar dosent sell them with the correct backspacing for a vette. This car is very low.
the bads that i know of are the front and rear bumper covers and the mirrors could use a repaint due to paint chipping.
the car also could stand some more tuning. I have the hp tuners but im limited on time so tuning takes me forever.
i will sell the car as it is. Or i can have it tuned elsewhere. Ill sell with one set of wheels or both. I can remove the heads and cam and reinstall the stock heads and smaller cam i have.
15k with everything, 2 sets of wheels. Both sets of heads and cams and tuner.
13k with stock heads and smaller cam installed.
16.5k with a wood floor car hauler that i used 3 times.
832 258 1300
#7
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Nov 2013
Location: Danbury, TX
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
i am willing to look at trades.
also forgot to say in the ad that it is a new gm engine installed about 4k ago. i have the 8k reciept to prove it.
Trending Topics
#8
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Nov 2013
Location: Danbury, TX
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
and im really close to paying you to tune it, so i can spend time driving and not tuning. but i havent driven the car in about two months since ive done nothing but work.