bunch o' stuff for sale LSX (5.3 shortblock,heads,NOS kit)
#1
Launching!
Thread Starter
iTrader: (5)
Join Date: Aug 2005
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
bunch o' stuff for sale LSX (5.3 shortblock,heads,NOS kit)
got a couple of parts that i need to sell in order to fix my car (blown 10 bolt)
1. nitrous system off of my car. it is a Cold Fusion nitrous wet kit for an ls1.has a bmn window switch with a shift light, 10lb bottle with brackets, automatic bottle heater, blanket, and a ls1 plate kit for the ls1 or ls6 intake have multiple jets for 50-250 shot. ran it once or twice to make sure it all works.will get pics of the kit installed on the car
$700
2. I have a 98 throttle body $35
3. 98 ls1 heads, bought them off of a member here, but ive decided to go another direction. need new valve springs, as one of the retainers broke. they flow the same as the ls6 heads
$175 including Valve Covers(parameter bolt heads)
4. i have a 5.3 short block that i picked up to use as a swap. decided not to, and here it is for sale. all sensors are,and front/rear/oil pan covers included. water pump and a/c bracket are included. the crank is in great shape, and you can get away with a bearing re-ring job and be done
$550
All these prices are obo, so shoot me a pm!
1. nitrous system off of my car. it is a Cold Fusion nitrous wet kit for an ls1.has a bmn window switch with a shift light, 10lb bottle with brackets, automatic bottle heater, blanket, and a ls1 plate kit for the ls1 or ls6 intake have multiple jets for 50-250 shot. ran it once or twice to make sure it all works.will get pics of the kit installed on the car
$700
2. I have a 98 throttle body $35
3. 98 ls1 heads, bought them off of a member here, but ive decided to go another direction. need new valve springs, as one of the retainers broke. they flow the same as the ls6 heads
$175 including Valve Covers(parameter bolt heads)
4. i have a 5.3 short block that i picked up to use as a swap. decided not to, and here it is for sale. all sensors are,and front/rear/oil pan covers included. water pump and a/c bracket are included. the crank is in great shape, and you can get away with a bearing re-ring job and be done
$550
All these prices are obo, so shoot me a pm!
Last edited by LS198Z28; 05-25-2008 at 06:52 PM.
Trending Topics
#8
Launching!
Thread Starter
iTrader: (5)
Join Date: Aug 2005
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
yes, this is typical, primarily when they are pulled and stored with oil in them for a while. the bottom end has a little sludge on it, hence why i suggested a rebuild. The crank is in great shape though, as you can see.
#15
Launching!
Thread Starter
iTrader: (5)
Join Date: Aug 2005
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
nitous kit will include the relays, switches labeled wires showing you how to hook it up,WOT switch,bottle, bottle brackets, all the lines, fuel solenoid, NOS solenoid, nitrous controller, shift light modified to work with the nitro controller, N20 outlet ls1/6 plate, and nozzles from 50-200hp shot