*HUGE 2000 Camaro SS Drag Car Part Out Sale! Performance & Stock Parts*
05-19-2008, 05:39 PM
#1
*HUGE 2000 Camaro SS Drag Car Part Out Sale! Performance & Stock Parts* I've decided to sell the race car, in which I will be parting out. Below is a list of the available parts. If you do not see what you're looking for, I do not have it. Please do not ask me about parts not listed below.
Condition of parts: If there's an asterik (*) next to the part, it means that it's basically new with only (10) 1/4 mile passes on it. To make a long story short, we built the car, then realized we just don't have time for it. So now we're parting it out. The rest of the parts are in excellent/new like condition.
Feedback: I have 100% positive feedback here on the board and on Ebay (i8asvt), with a combined score count of 170.
Payment: I accept Paypal, money orders, cashier's checks, Wester Union, Moneygram, etc., with Paypal being the preferred payment. If you choose to use Paypal for payment, you must send as an instant transfer or an e-Check. No credit card payments.
Shipping: Prices do not include shipping.
Prices: No low balling, trades, bashing, and please, do not reference prices to Ebay. If you have any comments, opinions, or suggestions, please PM me. There's no need for a discussion, debate, or war on my parts for sale. So please, let's keep this clean.
Engine:
*GM LS3/L92 Aluminum Block
*Callies Dragonslayer 4” Stroke Crankshaft
*Callies Connecting Rods
*Wiseco Custom 9.6cc Dome Pistons
*Wiseco Custom Pins
*Wiseco GF Piston Rings
*Federal Mogul Main Bearings
*Federal Mogul Cam Bearings
*ACL HB Coated Rod Bearings
*ARP Main Stud Kit
*ARP 2000 Series Rod Bolts
Shortblock: Block honed, line honed, deck set with pistons, balanced, and assembled by Erik Koenig of HKE Racing Engines $4,925
Cylinder heads/Valvetrain:
*Greg Good Fully Ported/Polished LS3/L92 Cylinder Heads (New Castings) w/Xceldyne Titanium Intake Valves, Ferrea Hollow Stem Exhaust Valves, Custom Spring Seats, Patriot Gold Extreme Dual Spring Kit, & 67cc Combustion Chambers - $2975
*Morel Hydraulic Lifters - $420
*Manton Restricted Pushrods - $170
*HKE Custom 254/266 .650”/.650” Camshaft - $330
Oil system:
*Star Vacuum Pump w/Adjustable Regulator, Mounting Bracket, Drive Pulley, Pump Pulley, Mandrel, & Belt - $890
*Moroso Vacuum Pump Breather Tank - $65
Fuel:
Racetronix Fuel System - $200
Ignition/Electrical:
Dyna-Batt/Odyssey Battery - $135
Coil Pack Relocation Kit - $100
Drivetrain/Transmission:
Protorque Torque Converter (TH350) - $850
Suspension & Chassis:
BMR Upper A-Arms (Red) - $210
QA1 Hal 275 Lb. Coil Springs - $100
Spohn Chromoly Adjustable Lower Control Arms w/Spherical Rod Ends & Offset Spacers (Red) - $230
Wolfe Racecraft Sway/Drag Bar (Black) - $340
Braking & Steering:
Grant Polished Aluminum 3 Spoke Steering Wheel w/Vinyl Grip (771) - $75
Interior & Safety:
RJS Black 5-point Camlock Harness - $115
*Autometer Ultimate II Tachometer $525
Wheels & Tires:
Bogart Floyd RT Bolted (Rear-15"x10"/Front-15"x3.5"/5" Backspacing) - $1365
*Hoosier Radial Slicks 30x10.5x15 - $390
McGard Front & Rear Lugnuts - $85
Stock Parts:
Camaro Rear Bench Seat - Portion that your back rests on only, cloth (tweed like material), 2-tone (light gray/dark gray), new/excellent condition, etc. $40 + shipping.
IAC Sensor - $50 shipped
Starter - $100 shipped
A/C condenser - $100 shipped
HVAC ducting (for vents) - $20 shipped
Brake master cylinder - $80 shipped
Brake booster - $100 shipped
Rear brake rotors - $50 shipped
Rear brake hoses - $35 shipped
Wheel hubs w/speed sensors - $200
Air pump bracket - $15 shipped
Lifters - $60 shipped
Rear seat belts (ebony/black) - $60 shipped
Monsoon amp - $80 shipped
Passenger airbag bracket - $15 shipped
Panhard bar - $30 shipped
Upper a-arms - $70 shipped
Wiper motor/linkage - $90 shipped
Wiper blades – $10 shipped
Rear bumper support - $75 shipped
Condition of parts: If there's an asterik (*) next to the part, it means that it's basically new with only (10) 1/4 mile passes on it. To make a long story short, we built the car, then realized we just don't have time for it. So now we're parting it out. The rest of the parts are in excellent/new like condition.
Feedback: I have 100% positive feedback here on the board and on Ebay (i8asvt), with a combined score count of 170.
Payment: I accept Paypal, money orders, cashier's checks, Wester Union, Moneygram, etc., with Paypal being the preferred payment. If you choose to use Paypal for payment, you must send as an instant transfer or an e-Check. No credit card payments.
Shipping: Prices do not include shipping.
Prices: No low balling, trades, bashing, and please, do not reference prices to Ebay. If you have any comments, opinions, or suggestions, please PM me. There's no need for a discussion, debate, or war on my parts for sale. So please, let's keep this clean.
Engine:
*GM LS3/L92 Aluminum Block
*Callies Dragonslayer 4” Stroke Crankshaft
*Callies Connecting Rods
*Wiseco Custom 9.6cc Dome Pistons
*Wiseco Custom Pins
*Wiseco GF Piston Rings
*Federal Mogul Main Bearings
*Federal Mogul Cam Bearings
*ACL HB Coated Rod Bearings
*ARP Main Stud Kit
*ARP 2000 Series Rod Bolts
Shortblock: Block honed, line honed, deck set with pistons, balanced, and assembled by Erik Koenig of HKE Racing Engines $4,925
Cylinder heads/Valvetrain:
*Greg Good Fully Ported/Polished LS3/L92 Cylinder Heads (New Castings) w/Xceldyne Titanium Intake Valves, Ferrea Hollow Stem Exhaust Valves, Custom Spring Seats, Patriot Gold Extreme Dual Spring Kit, & 67cc Combustion Chambers - $2975
*Morel Hydraulic Lifters - $420
*Manton Restricted Pushrods - $170
*HKE Custom 254/266 .650”/.650” Camshaft - $330
Oil system:
*Star Vacuum Pump w/Adjustable Regulator, Mounting Bracket, Drive Pulley, Pump Pulley, Mandrel, & Belt - $890
*Moroso Vacuum Pump Breather Tank - $65
Fuel:
Racetronix Fuel System - $200
Ignition/Electrical:
Dyna-Batt/Odyssey Battery - $135
Coil Pack Relocation Kit - $100
Drivetrain/Transmission:
Protorque Torque Converter (TH350) - $850
Suspension & Chassis:
BMR Upper A-Arms (Red) - $210
QA1 Hal 275 Lb. Coil Springs - $100
Spohn Chromoly Adjustable Lower Control Arms w/Spherical Rod Ends & Offset Spacers (Red) - $230
Wolfe Racecraft Sway/Drag Bar (Black) - $340
Braking & Steering:
Grant Polished Aluminum 3 Spoke Steering Wheel w/Vinyl Grip (771) - $75
Interior & Safety:
RJS Black 5-point Camlock Harness - $115
*Autometer Ultimate II Tachometer $525
Wheels & Tires:
Bogart Floyd RT Bolted (Rear-15"x10"/Front-15"x3.5"/5" Backspacing) - $1365
*Hoosier Radial Slicks 30x10.5x15 - $390
McGard Front & Rear Lugnuts - $85
Stock Parts:
Camaro Rear Bench Seat - Portion that your back rests on only, cloth (tweed like material), 2-tone (light gray/dark gray), new/excellent condition, etc. $40 + shipping.
IAC Sensor - $50 shipped
Starter - $100 shipped
A/C condenser - $100 shipped
HVAC ducting (for vents) - $20 shipped
Brake master cylinder - $80 shipped
Brake booster - $100 shipped
Rear brake rotors - $50 shipped
Rear brake hoses - $35 shipped
Wheel hubs w/speed sensors - $200
Air pump bracket - $15 shipped
Lifters - $60 shipped
Rear seat belts (ebony/black) - $60 shipped
Monsoon amp - $80 shipped
Passenger airbag bracket - $15 shipped
Panhard bar - $30 shipped
Upper a-arms - $70 shipped
Wiper motor/linkage - $90 shipped
Wiper blades – $10 shipped
Rear bumper support - $75 shipped
Last edited by Dragaholic; 10-16-2008 at 08:49 PM.
Trending Topics
05-21-2008, 09:38 AM
#8
Guys, come on. This is someone's for sale thread. If you aren't inquiring about the items he has for sale do not post. And that doesn't mean inquiring about "Why such a high price?". I don't want this to get ugly. Fact is, if you keep it up I am going to just delete it and depending on how I feel, test out my hand at infraction passing out.
05-23-2008, 09:42 AM
#15
Banned
iTrader: (13)
Join Date: Jan 2008
Location: Alvin,Tx
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Well I was supposed to pick it up last night but I guess he got busy or something. So I am going to assume its pending to me. I sure hope so...I sold the SS hood yesterday to buy this one 
Ill let jeremy confirm this.
Ill let jeremy confirm this.
05-23-2008, 10:15 AM
#16
Banned
iTrader: (13)
Join Date: Jan 2008
Location: Alvin,Tx
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Just got a call from Dragaholic. He is having computer issues at his office and is not being able to respond. He did say the hood is pending sale to me as I am waiting for him to get off work to pick it up.
. 
05-23-2008, 10:10 PM
#20
Hood sold!
Speed Density, there won't be any need to as long as the posts are inquiring about the parts I have for sale.
To answer your question, a lot. They don't have much use on them. I don't know how many passes, they don't have any street use, etc.
Speed Density, there won't be any need to as long as the posts are inquiring about the parts I have for sale.
To answer your question, a lot. They don't have much use on them. I don't know how many passes, they don't have any street use, etc.