Who was this? (Yellow C5 Z06 w/yellow wheels, DFW)
#21
Where is all this madness goin on in ole Johnson County and how come I havent ever seen any of it.
I would like to come with and stir the pot with my slow LT1
I was with Zachs dad the other day and he took out the spool and is putting nitrous back on his camaro. We are both gonna go to Ennis with it when it opens back up just to see what it can do since Zach never got that chance. You should come with.
#22
TECH Fanatic
Thread Starter
iTrader: (16)
Join Date: Dec 2005
Location: Alvarado, Texas
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
Where is all this madness goin on in ole Johnson County and how come I havent ever seen any of it.
I would like to come with and stir the pot with my slow LT1
I was with Zachs dad the other day and he took out the spool and is putting nitrous back on his camaro. We are both gonna go to Ennis with it when it opens back up just to see what it can do since Zach never got that chance. You should come with.
I would like to come with and stir the pot with my slow LT1
I was with Zachs dad the other day and he took out the spool and is putting nitrous back on his camaro. We are both gonna go to Ennis with it when it opens back up just to see what it can do since Zach never got that chance. You should come with.
Zach's camaro is super slick. I saw it about a month ago at the car show @ the park in cleburne. I know Zach would be stoked to know what I have done now, Lol! Sure miss him. RIP Zach.
If Zachs Dad ever wants a single/twin turbo kit done for the ol' camaro, Labor is on me!
#23
TECH Fanatic
Thread Starter
iTrader: (16)
Join Date: Dec 2005
Location: Alvarado, Texas
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
If me, yes you did pull me nasty on the 400 shot a few years back in my old slobra. I imagine when you get yours running, I will have already done a twin 67's with fully built motor making xxxx amount of power.
J/K, on a serious note, I don't really see whats in making more than 700-800rwhp, even on my little 650-700rwhp it gets sideways at 50-60mph with my fat hoosiers.
I thought about putting some stock rubber under the rear just to see what mph I can lite 'em up. But, staying alive talked me out of that.
#24
You're always welcome to cruise along.
Zach's camaro is super slick. I saw it about a month ago at the car show @ the park in cleburne. I know Zach would be stoked to know what I have done now, Lol! Sure miss him. RIP Zach.
If Zachs Dad ever wants a single/twin turbo kit done for the ol' camaro, Labor is on me!
Zach's camaro is super slick. I saw it about a month ago at the car show @ the park in cleburne. I know Zach would be stoked to know what I have done now, Lol! Sure miss him. RIP Zach.
If Zachs Dad ever wants a single/twin turbo kit done for the ol' camaro, Labor is on me!
Yeah that paint job came back great. Thats nice of you man , I had to talk his dad into putting spray back on it and taking it to the track and hotrodding it. I told him that its the way it was meant to be driven ***** to the wall everywhere.
PM sent
#25
9 Sec. Club!!!
iTrader: (1)
Join Date: Jul 2004
Location: HEB TX
Posts: 1,492
Likes: 0
Received 0 Likes
on
0 Posts
Me or Dan?
If me, yes you did pull me nasty on the 400 shot a few years back in my old slobra. I imagine when you get yours running, I will have already done a twin 67's with fully built motor making xxxx amount of power.
J/K, on a serious note, I don't really see whats in making more than 700-800rwhp, even on my little 650-700rwhp it gets sideways at 50-60mph with my fat hoosiers.
I thought about putting some stock rubber under the rear just to see what mph I can lite 'em up. But, staying alive talked me out of that.
If me, yes you did pull me nasty on the 400 shot a few years back in my old slobra. I imagine when you get yours running, I will have already done a twin 67's with fully built motor making xxxx amount of power.
J/K, on a serious note, I don't really see whats in making more than 700-800rwhp, even on my little 650-700rwhp it gets sideways at 50-60mph with my fat hoosiers.
I thought about putting some stock rubber under the rear just to see what mph I can lite 'em up. But, staying alive talked me out of that.
#26
TECH Fanatic
iTrader: (1)
Where is all this madness goin on in ole Johnson County and how come I havent ever seen any of it.
I would like to come with and stir the pot with my slow LT1
I was with Zachs dad the other day and he took out the spool and is putting nitrous back on his camaro. We are both gonna go to Ennis with it when it opens back up just to see what it can do since Zach never got that chance. You should come with.
I would like to come with and stir the pot with my slow LT1
I was with Zachs dad the other day and he took out the spool and is putting nitrous back on his camaro. We are both gonna go to Ennis with it when it opens back up just to see what it can do since Zach never got that chance. You should come with.
#27
TECH Fanatic
iTrader: (27)
Join Date: May 2004
Location: DFW
Posts: 1,597
Likes: 0
Received 0 Likes
on
0 Posts
Me or Dan?
If me, yes you did pull me nasty on the 400 shot a few years back in my old slobra. I imagine when you get yours running, I will have already done a twin 67's with fully built motor making xxxx amount of power.
J/K, on a serious note, I don't really see whats in making more than 700-800rwhp, even on my little 650-700rwhp it gets sideways at 50-60mph with my fat hoosiers.
I thought about putting some stock rubber under the rear just to see what mph I can lite 'em up. But, staying alive talked me out of that.
If me, yes you did pull me nasty on the 400 shot a few years back in my old slobra. I imagine when you get yours running, I will have already done a twin 67's with fully built motor making xxxx amount of power.
J/K, on a serious note, I don't really see whats in making more than 700-800rwhp, even on my little 650-700rwhp it gets sideways at 50-60mph with my fat hoosiers.
I thought about putting some stock rubber under the rear just to see what mph I can lite 'em up. But, staying alive talked me out of that.
lol. that night we raced it was only a a 250 shot. and the most it ever was on was 300.
that being said, it was making 800ft/lbs and had no problem hooking from a 50 hit on 315 BFG's....
you just need a good tire under the car. Slicks aren't always the best for traction when it comes to the streets homie
and if you REALLY wanted to get serious. you need to buy an Eboost2. (mines sitting in my office), you can progess teh boost in over time, or you can select boost by gear. (which is what i'm gonig to do).
like i said, it takes money to do a setup right, which is why it's taken me so long.....
#28
TECH Fanatic
Thread Starter
iTrader: (16)
Join Date: Dec 2005
Location: Alvarado, Texas
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
lol. that night we raced it was only a a 250 shot. and the most it ever was on was 300.
that being said, it was making 800ft/lbs and had no problem hooking from a 50 hit on 315 BFG's....
you just need a good tire under the car. Slicks aren't always the best for traction when it comes to the streets homie
and if you REALLY wanted to get serious. you need to buy an Eboost2. (mines sitting in my office), you can progess teh boost in over time, or you can select boost by gear. (which is what i'm gonig to do).
like i said, it takes money to do a setup right, which is why it's taken me so long.....
that being said, it was making 800ft/lbs and had no problem hooking from a 50 hit on 315 BFG's....
you just need a good tire under the car. Slicks aren't always the best for traction when it comes to the streets homie
and if you REALLY wanted to get serious. you need to buy an Eboost2. (mines sitting in my office), you can progess teh boost in over time, or you can select boost by gear. (which is what i'm gonig to do).
like i said, it takes money to do a setup right, which is why it's taken me so long.....
#29
TECH Fanatic
iTrader: (27)
Join Date: May 2004
Location: DFW
Posts: 1,597
Likes: 0
Received 0 Likes
on
0 Posts
resleeved #7, put a new piston in and had the car another 3 month. then it was discovered there was a hair line fracture in the water jacket... who knows how that happened... RPM told me the machine shop did it when they resleeved it. but who knows. :shrug:
so i tore it down, sold off everything and started building this build. there isn't one part in this motor that was from the old motor.
hence why it's taken so long. new 408, new heads, intake, water pump, radi, tranny, clutch, turbo, IC, wastegate, boost controoler, ENTIRE new fuel system, 10pt cage....the list goes on and on and on!! lol
#30
9 Sec. Club!!!
iTrader: (1)
Join Date: Jul 2004
Location: HEB TX
Posts: 1,492
Likes: 0
Received 0 Likes
on
0 Posts
lol. that night we raced it was only a a 250 shot. and the most it ever was on was 300.
that being said, it was making 800ft/lbs and had no problem hooking from a 50 hit on 315 BFG's....
you just need a good tire under the car. Slicks aren't always the best for traction when it comes to the streets homie
and if you REALLY wanted to get serious. you need to buy an Eboost2. (mines sitting in my office), you can progess teh boost in over time, or you can select boost by gear. (which is what i'm gonig to do).
like i said, it takes money to do a setup right, which is why it's taken me so long.....
that being said, it was making 800ft/lbs and had no problem hooking from a 50 hit on 315 BFG's....
you just need a good tire under the car. Slicks aren't always the best for traction when it comes to the streets homie
and if you REALLY wanted to get serious. you need to buy an Eboost2. (mines sitting in my office), you can progess teh boost in over time, or you can select boost by gear. (which is what i'm gonig to do).
like i said, it takes money to do a setup right, which is why it's taken me so long.....
#32
TECH Fanatic
Thread Starter
iTrader: (16)
Join Date: Dec 2005
Location: Alvarado, Texas
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TINKRD
that's b/c you dont make enough power to break the tires loose :p
I don't think you fully understand (no pun intended) what it TRULY takes to make a decent reliable 1xxxrwhp combo. Suspension, driveline, etc etc etc.
Another words, I think you would have more fun in the 700-800rwhp range than 1k+.
Last edited by Vcious04; 12-08-2009 at 04:08 PM.
#34
On The Tree
iTrader: (1)
Join Date: Jan 2006
Location: desoto, tx
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
+1, hell yeah Dan!! All I need is my MBC, works flawless!
That is funny, BUT, you will look back at this thread in a year (thats my eta to your completion) and say to yourself, "Damn, they were making about the same power I am making now a year later". OH SNAP!
I don't think you fully understand (no pun intended) what it TRULY takes to make a decent reliable 1xxxrwhp combo.
That is funny, BUT, you will look back at this thread in a year (thats my eta to your completion) and say to yourself, "Damn, they were making about the same power I am making now a year later". OH SNAP!
I don't think you fully understand (no pun intended) what it TRULY takes to make a decent reliable 1xxxrwhp combo.
#35
TECH Fanatic
Thread Starter
iTrader: (16)
Join Date: Dec 2005
Location: Alvarado, Texas
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
I'm pretty sure jp gets it lol. It's no different than you would expect. It takes a metric fuckton of money to go fast. Reliability is an illusion anyways. If you're like me no matter how much you spend on parts the thought is always there in your mind that it could blow the **** up due to a faulty part. Lol
#36
9 Sec. Club!!!
iTrader: (1)
Join Date: Jul 2004
Location: HEB TX
Posts: 1,492
Likes: 0
Received 0 Likes
on
0 Posts
I'm pretty sure jp gets it lol. It's no different than you would expect. It takes a metric fuckton of money to go fast. Reliability is an illusion anyways. If you're like me no matter how much you spend on parts the thought is always there in your mind that it could blow the **** up due to a faulty part. Lol
#38
TECH Fanatic
Thread Starter
iTrader: (16)
Join Date: Dec 2005
Location: Alvarado, Texas
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
once you mod a car reliability goes out the window anyways. That is why I keep my tool box in the trunk. You never know when something might go wrong, just like that o ring on the fuel injector that split a few weeks back. Little **** like that will put you on the side of the road real quick...
But on the other side, JP could build a monster and just run low boost and still make nice power. Thats what I would do and plan on doing. Wouldn't it be great to make 800rwhp on 10-12psi.
#40
TECH Fanatic
iTrader: (27)
Join Date: May 2004
Location: DFW
Posts: 1,597
Likes: 0
Received 0 Likes
on
0 Posts
once you mod a car reliability goes out the window anyways. That is why I keep my tool box in the trunk. You never know when something might go wrong, just like that o ring on the fuel injector that split a few weeks back. Little **** like that will put you on the side of the road real quick...
true dat.
i'm not hating on you or Jeremy. i think ya'lls rides are sick for what's done to them. you're faster then 98% of the cars on the road. all i'm saying is i started my build to go after that last 2 %
the time will come when we line'em up 3 wide. take my word