HPE C5 Z06 w/ 418 LS3
05-15-2010, 11:24 AM
#42
TECH Addict
iTrader: (2)
Join Date: Jun 2004
Location: houston tx
Posts: 2,303
Likes: 0
Received 0 Likes
on
0 Posts
Just curious but isnt that a rather small cam for that car? I just remember the spec's from the S-cam and they look rather close. Correct me if im wrong please.
05-15-2010, 08:33 PM
#43
Banned
Thread Starter
Join Date: Nov 2008
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
The porting on the heads were 1400 done by hand and the flowed somewhere around 360 cfm.
The cam specs are not the best for the application but the customer wanted the MegaDeath cam. There is more on the table the way the motor is we could port intake, electric water pump, upgraded intake track. But again this was done within jstrib's budget.
The cam specs are not the best for the application but the customer wanted the MegaDeath cam. There is more on the table the way the motor is we could port intake, electric water pump, upgraded intake track. But again this was done within jstrib's budget.
