is lonestar muscle still around?
#82
TECH Resident
iTrader: (127)
He has a custom grind cam 228/228 on a 588/588, It dynoed 390/405 to the rear wheels with cam only. It has a tdp built 6 speed/tdp stage 3 clutch/tdp light weight flywheel/4.10's/bmr lca's/ls6 intake/pp tb/pacesetter lt headers/lid/slp bellow and stock heads. We are trying to get to the 400rwhp mark and I think an underdrive pulley and finer tunning will get us there.
#84
TECH Fanatic
iTrader: (1)
Join Date: Apr 2005
Location: Fort Worth, TX
Posts: 1,894
Likes: 0
Received 0 Likes
on
0 Posts
Car sounded great btw.
I was wondering where you went, one minute you were standing next to me then I turn around and you were gone.
#88
Teching In
iTrader: (2)
Join Date: May 2008
Location: weatherford tx
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
I saw your car and it looked very clean. Is it stock in the engine bay? It would be a nice sleeper the way it looks right now.
He has a custom grind cam 228/228 on a 588/588, It dynoed 390/405 to the rear wheels with cam only. It has a tdp built 6 speed/tdp stage 3 clutch/tdp light weight flywheel/4.10's/bmr lca's/ls6 intake/pp tb/pacesetter lt headers/lid/slp bellow and stock heads. We are trying to get to the 400rwhp mark and I think an underdrive pulley and finer tunning will get us there.
He has a custom grind cam 228/228 on a 588/588, It dynoed 390/405 to the rear wheels with cam only. It has a tdp built 6 speed/tdp stage 3 clutch/tdp light weight flywheel/4.10's/bmr lca's/ls6 intake/pp tb/pacesetter lt headers/lid/slp bellow and stock heads. We are trying to get to the 400rwhp mark and I think an underdrive pulley and finer tunning will get us there.
#89
#90
#91
Teching In
iTrader: (2)
Join Date: May 2008
Location: weatherford tx
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Cool I am thinking 4:10 also but they say the hiway cruise is a little hi on rpm's but I dont use mine for a daily driver .Since i have 2 - 10 bolts so if I dont like it or break it i can swap back .hope yall come back next week I'll make it a point to come over and Introduce my self so you can feel more welcome .
#92
TECH Resident
iTrader: (127)
Cool I am thinking 4:10 also but they say the hiway cruise is a little hi on rpm's but I dont use mine for a daily driver .Since i have 2 - 10 bolts so if I dont like it or break it i can swap back .hope yall come back next week I'll make it a point to come over and Introduce my self so you can feel more welcome .
#93
Teching In
iTrader: (2)
Join Date: May 2008
Location: weatherford tx
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Coold deal, As for the 4.10's, When I had my 4.10's I was cruising under 2k rpm's but I was on a m6. It makes a world of a difference over the 3.42's. I liked them so much I put 4.10's in my 99 SS a4. I have since sold that 99 SS and just own the 01 Z28 but now I have a moser 12bolt with 4.30 gears.
#99
Teching In
iTrader: (2)
Join Date: May 2008
Location: weatherford tx
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by R1Psycho
Come out for sure if ya'll can make it Good people without the drama that usually surrounds the car scene.
I dont understand are you comming or not .You will have to forvive my ignorance I am one of the old guys its gard to keep up with all yall young guys .Ha Ha
Originally Posted by R1Psycho
Come out for sure if ya'll can make it Good people without the drama that usually surrounds the car scene.
I dont understand are you comming or not .You will have to forvive my ignorance I am one of the old guys its gard to keep up with all yall young guys .Ha Ha