Any engine builders in Ft Worth?
Any engine builders in Ft Worth? Im putting together my frist ls1 build. Im looking for a shop, or a reputable individual who i can pay to either help me out in putting this engine together, or do it for me. I would rather find an individual i can pay to help me out and show me the ropes..
But only someone who has good feedback on these forums...The engine is short block right now, im still deciding what way to go with it. It will be going into my 89 240sx...
So if anyone knows, hit me up.
Davin m.
But only someone who has good feedback on these forums...The engine is short block right now, im still deciding what way to go with it. It will be going into my 89 240sx...
So if anyone knows, hit me up.
Davin m.
On The Tree
Joined: May 2008
Posts: 104
Likes: 0
From: weatherford, tx
check these guys out.......
http://www.raymacraceengines.com/
they do good work and are reasonably priced.
i took my sbc short block there and they helped piece me together a pretty good setup.
they know what they're doing.
http://www.raymacraceengines.com/
they do good work and are reasonably priced.
i took my sbc short block there and they helped piece me together a pretty good setup.
they know what they're doing.
thanks for the replys guys, Not sure where to start a build thread and keep it local..
But long story short, my friend dropped this block to swap in a 6.0 liter into his vette. This 5.7 was given to me, with no accessorys, no oil pan. Its really dirty. Im thinking first thing i need to do is take it somewhere to be cleaned. Here is some pics of how it sits now. I have stock heads with it. Every other part im sourcing from craigslist.
Reason for that is, im just looking to build this thing back up, get to know how to rebuild it. etc etc... so super high cost build is not what im doing this time around. Once i get this rebuilt, and get it into my 240sx... then im going to tackle another build starting with a 6.0 liter truck engine, crazy heads, cam etc etc..
for now i wanna just keep this one with the tr220 cam i have, find ls6 intake... and go from there.
pics... its very dirty
Im not sure how to get the gasket remains off without hurting the aluminum
But long story short, my friend dropped this block to swap in a 6.0 liter into his vette. This 5.7 was given to me, with no accessorys, no oil pan. Its really dirty. Im thinking first thing i need to do is take it somewhere to be cleaned. Here is some pics of how it sits now. I have stock heads with it. Every other part im sourcing from craigslist.
Reason for that is, im just looking to build this thing back up, get to know how to rebuild it. etc etc... so super high cost build is not what im doing this time around. Once i get this rebuilt, and get it into my 240sx... then im going to tackle another build starting with a 6.0 liter truck engine, crazy heads, cam etc etc..
for now i wanna just keep this one with the tr220 cam i have, find ls6 intake... and go from there.
pics... its very dirty
Im not sure how to get the gasket remains off without hurting the aluminum
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Apprentice
Joined: Feb 2009
Posts: 365
Likes: 0
From: A DEN
. He is workin for LenMar at the moment. 