2011 5.0 Mustangs....
#121
TECH Regular
iTrader: (3)
I actually had a chance to run one yesterday. It was a manual with exhaust. I did have my girl in the car so that has a slight effect Im sure. Letting him get the jump and 2 cars ahead starting point from 60 I didnt have much of an issue with going around him by 150. This was giving him the jump and a good 2 cars directly in front of me. I did have TC on, when shifting it would step in and take some power away. Of course my corvette is substatialy lighter than a camaro. The mustang is a very VERY impressive car.
My mods- z06 exhaust and vararam. 415 or so rwhp.
Jeff
My mods- z06 exhaust and vararam. 415 or so rwhp.
Jeff
#122
In-Zane Moderator
iTrader: (25)
Otherwise, the Ford is pushing nearly as hard as it can NA, i am waiting to see one push close to 500 RWHP like the LS3 can, the LS is holding back more while the 5.0 is near its limitation.
Still confused on why Ford has not make a 5.4 that was even nastier and just skip the whole 5.0 process.
#124
11 Second Club
Join Date: Sep 2008
Location: Houston, TX
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Hell, if GM had the tech in the LS heads that Ford does it might be different, the truth is, the LS3 heads is nearly identical to the intake ports of the old big blocks from the 60s and early 70s rectangle ports. There are other changes that are new in the tech department of the LS3 heads, but not allot. Seems they took tips from aftermarket makers and got the intake velocity up for lower engine speeds.
Otherwise, the Ford is pushing nearly as hard as it can NA, i am waiting to see one push close to 500 RWHP like the LS3 can, the LS is holding back more while the 5.0 is near its limitation.
Still confused on why Ford has not make a 5.4 that was even nastier and just skip the whole 5.0 process.
Otherwise, the Ford is pushing nearly as hard as it can NA, i am waiting to see one push close to 500 RWHP like the LS3 can, the LS is holding back more while the 5.0 is near its limitation.
Still confused on why Ford has not make a 5.4 that was even nastier and just skip the whole 5.0 process.
#125
In-Zane Moderator
iTrader: (25)
Not saying a stock 5.4, just a 5.4 or so with all the 5.0 goodies, either way, revving lower by a touch with more cubes will still usually make more TQ and HP when the combination is right.
There is only so much that you can get out of 93 octane NA and 302 cubes is about 450 FWHP optimal with older technology, so the newer is only going to stretch a bit further, so till i see several, not just one or two pumping way over 400 RWHP all motor, they are running heads that are pretty much as bad *** as aftermarket can get im sure. I want to be proven wrong for sure, i look forward to the little lack of pushrod motor putting high NA numbers.
There is only so much that you can get out of 93 octane NA and 302 cubes is about 450 FWHP optimal with older technology, so the newer is only going to stretch a bit further, so till i see several, not just one or two pumping way over 400 RWHP all motor, they are running heads that are pretty much as bad *** as aftermarket can get im sure. I want to be proven wrong for sure, i look forward to the little lack of pushrod motor putting high NA numbers.
#126
Why are people trying to compare ls1's to the 5.0? In no way shape or form does the ls1 compare. Only the ls3 can hang with it. Even Nissan is producing motors that can out perform an ls1.
The ls1is old and outdated. Get over it.
The ls1is old and outdated. Get over it.
#129
Teching In
iTrader: (1)
Join Date: Nov 2006
Location: Baytown Tx
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
I haven't run the 5.0 but I did get to run a 2010-2011 cobra. It it ran strong. But I did beat him three out of three in my c5 Vette with full bolt-on's and a cam. I haven't installed the heads or fast yet but it put down 410 rwhp with the clutch slipping
I put a 1-1/2 cars on him everytime. From 0-30-60
I put a 1-1/2 cars on him everytime. From 0-30-60
#133
On The Tree
iTrader: (2)
Join Date: Mar 2009
Location: Houston/288
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
I don't remember comparing the 5.0 to the LS1...LS1 is old news...
I specifically compared the 5.0 to the 6.3 and pointed out how the smaller engine was making the same power...
People are gonna start swapping 5.0's in there C6's !!!! LMFAO !!!!
I specifically compared the 5.0 to the 6.3 and pointed out how the smaller engine was making the same power...
People are gonna start swapping 5.0's in there C6's !!!! LMFAO !!!!
#134
I wansnt referring to you. Earlier in this thread people were comparing ls1 v 5.0
#135
On The Tree
iTrader: (2)
Join Date: Mar 2009
Location: Houston/288
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Ahhh ok...the M6 3.73 GT is running consistent 12.7's...that crazy...
I'm not a "Ford Guy" or a "GM Guy" - I like all kinds of cars...
STi's, Vettes, WS6's, EVO's, Esartee Fours, Esartee 8's, Cobras and Lightnings...they're all badass to me...
I've been extremely fortunate to own some of the above mentioned cars...I have a "favorite", but it doesn't make me a "??????? Guy"
I like'em all
I'm not a "Ford Guy" or a "GM Guy" - I like all kinds of cars...
STi's, Vettes, WS6's, EVO's, Esartee Fours, Esartee 8's, Cobras and Lightnings...they're all badass to me...
I've been extremely fortunate to own some of the above mentioned cars...I have a "favorite", but it doesn't make me a "??????? Guy"
I like'em all
#136
TECH Enthusiast
iTrader: (4)
Join Date: Feb 2009
Location: baytown, tx
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
Christ, can people please take the mustang **** slobbering to a ford website?
Search out The Colonel. I remember reading about him pulling 9's in a stock trim f car, back in the late 90's.
1 cam w/ pushrods > dohc w/ no pushrods
Search out The Colonel. I remember reading about him pulling 9's in a stock trim f car, back in the late 90's.
1 cam w/ pushrods > dohc w/ no pushrods
#139
Teching In
iTrader: (1)
Join Date: Nov 2006
Location: Baytown Tx
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
I was pointing out that the cobra has how much more then the 5.0? 540hp to the crank? And I beat him in a ls1 cam and headers c5 with 400rwhp. Yes I know the Vette is lighter.
Did I miss something? Is the 5.0 faster then the new cobra?
And yes I like the new stang too I just saying
"I would certainly hope a lighter 400 RWHP car could pull one."
Did I miss something? Is the 5.0 faster then the new cobra?
And yes I like the new stang too I just saying
"I would certainly hope a lighter 400 RWHP car could pull one."