Getting the TA ready for Paint lol

Thread Tools
 
Search this Thread
 
Old 04-26-2011 | 02:49 PM
  #81  
SSHAWK's Avatar
Thread Starter
10 Second Club

iTrader: (14)
 
Joined: Jan 2010
Posts: 468
Likes: 1
From: Forney, Tx
Default

Originally Posted by 00pooterSS
Hmmmm may have to consider, really appreciate the offer btw. If I get my alignment done by then, I will be doing it by hand until I get a new spindle, my LF is bent and the toe is off pretty far, so if im not too lazy to get out in the garage and do it I may take you up on that.
Sounds good to me.. I know my son would love to go to the track this weekend.
Old 04-26-2011 | 02:54 PM
  #82  
00pooterSS's Avatar
TECH Veteran
iTrader: (40)
 
Joined: Mar 2008
Posts: 4,916
Likes: 524
From: Dallas
Default

Originally Posted by SSHAWK
Sounds good to me.. I know my son would love to go to the track this weekend.
Cool, well im pretty sure we are going with or without the Camaro so if you go shoot me a message, I would like to see your car run, it's much faster than the last time I was out.
Old 04-26-2011 | 02:58 PM
  #83  
SSHAWK's Avatar
Thread Starter
10 Second Club

iTrader: (14)
 
Joined: Jan 2010
Posts: 468
Likes: 1
From: Forney, Tx
Default

Originally Posted by 00pooterSS
Cool, well im pretty sure we are going with or without the Camaro so if you go shoot me a message, I would like to see your car run, it's much faster than the last time I was out.
Yeah I have done a few things to it from the last time I made my 10's pass.

I'm ready for Joel lol Jgarza54

I will send you a pm if I get to go.

Last edited by SSHAWK; 04-26-2011 at 03:11 PM.
Old 04-26-2011 | 03:05 PM
  #84  
slowredz's Avatar
TECH Resident
iTrader: (23)
 
Joined: Aug 2005
Posts: 750
Likes: 0
From: DFW, Texas
Default

Originally Posted by SSHAWK
Yeah I have done a few things to it from the last time I made my 10's pass.

I ready for Joel lol Jgarza54

I will send you a pm if I get to go.
There was a TA at Denton last Friday that looked just like your pic in your sig. Best I saw it run was like a 7.16. But that may have been on motor
Old 04-26-2011 | 03:08 PM
  #85  
SSHAWK's Avatar
Thread Starter
10 Second Club

iTrader: (14)
 
Joined: Jan 2010
Posts: 468
Likes: 1
From: Forney, Tx
Default

Originally Posted by slowredz
There was a TA at Denton last Friday that looked just like your pic in your sig. Best I saw it run was like a 7.16. But that may have been on motor
Well it sure wasn't mine.... my car has been down for a month just for paint.

Last time I was at the track was in Jan/Feb
Old 04-26-2011 | 03:31 PM
  #86  
slowredz's Avatar
TECH Resident
iTrader: (23)
 
Joined: Aug 2005
Posts: 750
Likes: 0
From: DFW, Texas
Default

Originally Posted by SSHAWK
Well it sure wasn't mine.... my car has been down for a month just for paint.

Last time I was at the track was in Jan/Feb
Yeah I know from your thread, but it was your twin
Old 04-26-2011 | 04:47 PM
  #87  
00pooterSS's Avatar
TECH Veteran
iTrader: (40)
 
Joined: Mar 2008
Posts: 4,916
Likes: 524
From: Dallas
Default

Originally Posted by SSHAWK
Yeah I have done a few things to it from the last time I made my 10's pass.

I'm ready for Joel lol Jgarza54

I will send you a pm if I get to go.
What?! Now it's even faster? Have you sprayed it straight out of the hole yet?
Old 04-26-2011 | 04:59 PM
  #88  
GTOSE's Avatar
Now you have my attention
iTrader: (1)
 
Joined: Mar 2007
Posts: 2,324
Likes: 2
From: Mesa, AZ
Default

That's a lot of work. I hate bodywork.
Old 04-26-2011 | 05:05 PM
  #89  
Head Hunter's Avatar
11 Second Club

iTrader: (14)
 
Joined: Aug 2010
Posts: 235
Likes: 0
From: North Dallas
Default

Still no updated pictures? Stop keeping us waiting ...
Old 04-26-2011 | 05:40 PM
  #90  
jgarza54's Avatar
On The Tree
iTrader: (4)
 
Joined: Feb 2009
Posts: 114
Likes: 0
From: DFW area
Default

Originally Posted by SSHAWK
Yeah I have done a few things to it from the last time I made my 10's pass.

I'm ready for Joel lol Jgarza54

I will send you a pm if I get to go.
Ready for me? Why do you say? You should definitely whoop my ***... Now if you dont spray and its motor to motor I think it will be a good run.. Maybe..
Old 04-26-2011 | 09:42 PM
  #91  
skeeter99's Avatar
TECH Apprentice
iTrader: (16)
 
Joined: Dec 2010
Posts: 307
Likes: 0
From: Mesquite, Tx
Default

yea yall need to settle this lol
Old 04-27-2011 | 08:38 AM
  #92  
SSHAWK's Avatar
Thread Starter
10 Second Club

iTrader: (14)
 
Joined: Jan 2010
Posts: 468
Likes: 1
From: Forney, Tx
Default

Originally Posted by Head Hunter
Still no updated pictures? Stop keeping us waiting ...
Yesterday was not a very good day for me... My primer was spliting and flaking on parts that we used this new type of primer for the doors.. So I had to resand a few parts which at that time was just a mood kill. I spent the rest of the night trying to fix the two doors back so we can put a new primer on. My buddy said he would go ahead and start painting the car today when I'm at work so we can have the car ready for Sat.

And for anyone asking yes the doors were sanded down to the fiberglass so nothing was on the doors to make this **** start peelings.

I sanded down everything to it's bare state.

Originally Posted by jgarza54
Ready for me? Why do you say? You should definitely whoop my ***... Now if you dont spray and its motor to motor I think it will be a good run.. Maybe..
Hell... I will try a motor to motor run with my Nitrous tune. You know I'm game for it.

Originally Posted by skeeter99
yea yall need to settle this lol
This will never be settled with us two ... We have to much fun with it.. As soon as one beats the others its on again. hahah

Like I said Josh your next after him
Old 04-27-2011 | 09:10 AM
  #93  
Head Hunter's Avatar
11 Second Club

iTrader: (14)
 
Joined: Aug 2010
Posts: 235
Likes: 0
From: North Dallas
Default

Sucks to hear about the primer - hope it is smooth sailing from here on though

Originally Posted by SSHAWK
Like I said Josh your next after him
Don't forget us North Dallas guys... we want in on the action too
Old 04-27-2011 | 09:31 AM
  #94  
SSHAWK's Avatar
Thread Starter
10 Second Club

iTrader: (14)
 
Joined: Jan 2010
Posts: 468
Likes: 1
From: Forney, Tx
Default

Originally Posted by Head Hunter
Sucks to hear about the primer - hope it is smooth sailing from here on though



Don't forget us North Dallas guys... we want in on the action too
I hope so... I really want this car to be done but at the same time I don't want to rush anything with it.



lol Come gets some I don't care if I lose
Old 04-27-2011 | 10:12 AM
  #95  
Black2001z06's Avatar
TECH Enthusiast

iTrader: (32)
 
Joined: Aug 2005
Posts: 638
Likes: 0
From: The great state of Tejas!
Default

Originally Posted by SSHAWK
I hope so... I really want this car to be done but at the same time I don't want to rush anything with it.
Be patient...take your time and let Marty do it right.
Old 04-27-2011 | 10:18 AM
  #96  
jgarza54's Avatar
On The Tree
iTrader: (4)
 
Joined: Feb 2009
Posts: 114
Likes: 0
From: DFW area
Default

Originally Posted by Head Hunter
Don't forget us North Dallas guys... we want in on the action too
The only action you'll be seeing is the red taillights of one slow *** camaro getting futher and futher away and same goes for Sean... lol
Old 04-27-2011 | 10:26 AM
  #97  
SSHAWK's Avatar
Thread Starter
10 Second Club

iTrader: (14)
 
Joined: Jan 2010
Posts: 468
Likes: 1
From: Forney, Tx
Default

Originally Posted by Black2001z06
Be patient...take your time and let Marty do it right.
I will thats why I'm not going to rush it. I have spent this long making it right... whats a few more days is how I look at it.

Originally Posted by jgarza54
The only action you'll be seeing is the red taillights of one slow *** camaro getting futher and futher away and same goes for Sean... lol
lol **** lol

You have to get your car running and out of the shop first
Old 04-27-2011 | 11:43 AM
  #98  
jgarza54's Avatar
On The Tree
iTrader: (4)
 
Joined: Feb 2009
Posts: 114
Likes: 0
From: DFW area
Default

Originally Posted by SSHAWK
I will thats why I'm not going to rush it. I have spent this long making it right... whats a few more days is how I look at it.



lol **** lol

You have to get your car running and out of the shop first
Even when my car gets out, I probably won't be too hard on my car.. I have to make this engine last till I get my house, then it will be on to getting my built engine... Head Hunter, Im just talking **** in good fun..
Old 04-27-2011 | 12:00 PM
  #99  
SSHAWK's Avatar
Thread Starter
10 Second Club

iTrader: (14)
 
Joined: Jan 2010
Posts: 468
Likes: 1
From: Forney, Tx
Default

Originally Posted by jgarza54
Even when my car gets out, I probably won't be too hard on my car.. I have to make this engine last till I get my house, then it will be on to getting my built engine... Head Hunter, Im just talking **** in good fun..
So I have to wait until you get your house to whoop that *** ??
Old 04-27-2011 | 02:16 PM
  #100  
jgarza54's Avatar
On The Tree
iTrader: (4)
 
Joined: Feb 2009
Posts: 114
Likes: 0
From: DFW area
Default

Originally Posted by SSHAWK
So I have to wait until you get your house to whoop that *** ??
Oh no, just saying that once I do get my house, I will be able to start on the engine build that I want..


Quick Reply: Getting the TA ready for Paint lol



All times are GMT -5. The time now is 05:43 AM.