most random car repair on side of the road
#1
On The Tree
Thread Starter
iTrader: (10)
Join Date: Jan 2009
Location: Home town Houston station in ft hood
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
most random car repair on side of the road
ok so most random repair I have ever heard of happen to me today in middle of intersection
I was turning to go under 610 and car stopped turnning and just went straight almost into the curb so im across all lanes of traffic in the intersection, look under the drivers side and my tie rod end retaining bolt fell off so my tie rod fell off the spindle. lucky me i had a extra tierod end in the back seat and just but the rod back in the spindle tighten the nut as best i could and drove home
I was turning to go under 610 and car stopped turnning and just went straight almost into the curb so im across all lanes of traffic in the intersection, look under the drivers side and my tie rod end retaining bolt fell off so my tie rod fell off the spindle. lucky me i had a extra tierod end in the back seat and just but the rod back in the spindle tighten the nut as best i could and drove home
#2
Staging Lane
iTrader: (1)
Join Date: Mar 2002
Location: Lubbock, Tx
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
i had to do something similar on my f350... had it fall off in a parking lot while i was backing a trailer. i bailing wired it together as best i could just to finish the parking job then left and bought parts to fix it... im glad i got rid of that truck lol
#7
On The Tree
Thread Starter
iTrader: (10)
Join Date: Jan 2009
Location: Home town Houston station in ft hood
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
did the head gasket on my fiero in my condo parking lot in fl my x flipped when she saw my head and intake sitting in the bath tub getting cleaned up
Trending Topics
#11
TECH Regular
iTrader: (5)
Happened amonth ago my AC compressor came off on the highway, before that 3mins it happened i heard metal bolts hitting the bottom floor board, i pulled over looked under the car & nothing then 1/2 mile it happened. I still haven't fixed it I jus removed the compressor & AC belt.
#13
#17
Staging Lane
iTrader: (3)
Join Date: Nov 2007
Location: va
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
were should i start.
had to do fender rolling with a hammer in arrby parking lot on the way to track.
lost a tq arm bolt put in the screwdriver i had in it,and drove it home.
hit the y pipe on a man hole cove knock it off put it back on with a monster bfg can and the clamps the hold on the lid and mass air flow filter.
Thats all I can thank of for now.
had to do fender rolling with a hammer in arrby parking lot on the way to track.
lost a tq arm bolt put in the screwdriver i had in it,and drove it home.
hit the y pipe on a man hole cove knock it off put it back on with a monster bfg can and the clamps the hold on the lid and mass air flow filter.
Thats all I can thank of for now.
#20
On The Tree
iTrader: (6)
Join Date: Apr 2010
Location: la porte TX
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Used to have a 4wd ford f250. I was driving down the road when I busted a u joint to the rear. I hopped out in the middle turning lane. Pulled the driveshaft off, threw it in the back, put in 4wd and drove home with the front. Bad thing is when I turned it would hop. Funny ****.