2000 Z28 Camaro Wont start :( Help,Please :)
06-19-2012, 08:29 PM
#21
Teching In
Join Date: Jan 2012
Location: Hobart, IN
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
a few months ago i had this problem or something similar. security light was on, then off then always on. then sometimes didnt start. months later my alarm would go off for no reason or if the remote got too far from the car. out of curiosity i pulled the shock sensor out the car, where t
he spare tire and speaker is, security lights off no more problems EVER.
he spare tire and speaker is, security lights off no more problems EVER.
06-21-2012, 11:44 PM
#22
Teching In
Join Date: Dec 2011
Location: Clyde NC
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
having kinda the same issue. I just installed a wolfe cage in my car with the bars going through the speaker covers and i had to move the shock sensor. I havent had a chance to check it yet but ill see in the morning.
My only thing is the alarm had been going off for the past couple nights at work and when i got in the car to go home, it would take a few mins and it would fire up like nothing wrong with it. Ive never heard my alarm just go off on its own and I keep it in the shop. I have a guy living in the apartment over my shop, I think if the alarm was going off in the middle of the night he would have mentioned it by now haha.
My only thing is the alarm had been going off for the past couple nights at work and when i got in the car to go home, it would take a few mins and it would fire up like nothing wrong with it. Ive never heard my alarm just go off on its own and I keep it in the shop. I have a guy living in the apartment over my shop, I think if the alarm was going off in the middle of the night he would have mentioned it by now haha.
07-09-2012, 02:19 AM
#23
Staging Lane
Thread Starter
Join Date: Dec 2006
Location: Laredo,TX
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
I looked around & I dont see any pinched wires. The Tech2 scanner doesnt show any indications of anything either.
07-26-2012, 12:34 PM
#26
Staging Lane
Thread Starter
Join Date: Dec 2006
Location: Laredo,TX
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
The last thing we did was swapping out the pcm but still the car didnt start either but yesterday I went outiside to check again if any cables had gotten lose & before deciding on taking off the starter to recheck the CrankShaft Position Sensor.I went ahead & tried to turn the key & wow the car turned on. I went outside again today & it works!
I still want to know what was causing this issue? The PCM maybe?
I still want to know what was causing this issue? The PCM maybe?
07-26-2012, 03:21 PM
#27
Teching In
Join Date: Jun 2009
Location: San Diego Cali, Deer Park Tx
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a Crank Posistion sensor, i rebuilt my motor a few years back and took about 10 days to find out it wouldnt start due to the crank posistion sensor!
It will give out very little spark and i noticed my fuel pump wasnt pumping when i turned the key on..
Located on the passenger side of the block behind the starter.
wow NVM didnt even read the post on this 2nd page....congrats on the start!
It will give out very little spark and i noticed my fuel pump wasnt pumping when i turned the key on..
Located on the passenger side of the block behind the starter.
wow NVM didnt even read the post on this 2nd page....congrats on the start!
