Hello, I just bought an 8 rib ATI damper. Now I need to pin it. I need to borrow or rent the tool to drill it. I have the pin itself. I need it for a few hours only and will give it right back. I can leave a deposit or if you want to rent it to me that is fine too. Thank you in advance

 

I believe it stays on the car it's not like a pin kit for the stock pulley.

 

There is a tool kit that has a guide that bolts onto the end of the crank to allow you to drill a hole for the pin. Pretty sure it does not stay on, except for the pin.

http://www.speedinc.com/slp-ls-crank...l#!prettyPhoto

http://www.aacorvette.com/performanc...products_id=67

 

Yup i have that kit as well, that kit worked fine for the stock pulley but if he is using an 8" crank 8 rib pulley it won't work.

 

Why wouldn't it work? I don't want to take my crank out to get the slot put in it for the key. And no the kit only leaves the pin in, not the drilling instrument.

 

So no one has one I can borrow?

 

I have on

 

PM sent

 

This what you need mate?

 

http://www.innovatorswest.com/967-Crank-Pin-Kit.html

I thought you needed this type

 

http://www.superchargersonline.com/i...b55255794e2c40

or this kit?

 

I borrow the one from regorih383. Thanks a Mill by the way. It did not work the way it was intended...the OD is too big. Apparently I needed the Innovative West one but I was able to make something work using it.

 

Ok glad you got it to work

 

Hi guys, sorry to hijack. I am also in need of renting or borrowing a crank pin kit. I am looking for the one made by ATI as shown on this page near the bottom:

http://www.atiracing.com/products/dampers/

I will return it quickly and purchase my own pins to use.

Any help is greatly appreciated!!

Thank you

 

-shoot, I just realized this thread is not 2 days old, it is 1 year and 2 days old...