HPE "S" CAM Dyno Results!
#1
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: NW H-town
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
HPE "S" CAM Dyno Results!
First off...a BIG thanks to Chuck, Josh, Rick, Steven, and the rest of the crew at HPE.
To start with....i was crossing my fingers for 400-405 at the wheels with the new setup, especially since i was going to be running the Kooks 1 7/8ths, and running through the exhaust(NO CUTOUT).
The setup is a Kooks, O/R Y, Borla C/B, FAST 90mm intake/throttle body,Z06MAF and of course, the HPE's "S" cam.
Car was dynoed in street driving form-belt etc all in place. We will dyno with a cutout installed and open soon, and see if we can hit 430-435rwhp sae
The result was 424 @ 6500 SAE torque was probably in the 370 range...the dyno was reading spikes and giving a high number.
So without further adeu, here is the graph and vids....
First the Pull: http://www.horsepowerengineering.com/media/MOV01342.MPG
Here's the cam at idle: http://www.horsepowerengineering.com/media/MOV01344.MPG
and the dyno graph:
To start with....i was crossing my fingers for 400-405 at the wheels with the new setup, especially since i was going to be running the Kooks 1 7/8ths, and running through the exhaust(NO CUTOUT).
The setup is a Kooks, O/R Y, Borla C/B, FAST 90mm intake/throttle body,Z06MAF and of course, the HPE's "S" cam.
Car was dynoed in street driving form-belt etc all in place. We will dyno with a cutout installed and open soon, and see if we can hit 430-435rwhp sae
The result was 424 @ 6500 SAE torque was probably in the 370 range...the dyno was reading spikes and giving a high number.
So without further adeu, here is the graph and vids....
First the Pull: http://www.horsepowerengineering.com/media/MOV01342.MPG
Here's the cam at idle: http://www.horsepowerengineering.com/media/MOV01344.MPG
and the dyno graph:
#4
On The Tree
iTrader: (1)
Join Date: Jul 2004
Location: Cypress, Texas
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SJRTX
First off...a BIG thanks to Chuck, Josh, Rick, Steven, and the rest of the crew at HPE.
To start with....i was crossing my fingers for 400-405 at the wheels with the new setup, especially since i was going to be running the Kooks 1 7/8ths, and running through the exhaust(NO CUTOUT).
The setup is a Kooks, O/R Y, Borla C/B, FAST 90mm intake/throttle body,Z06MAF and of course, the HPE's "S" cam.
Car was dynoed in street driving form-belt etc all in place. We will dyno with a cutout installed and open soon, and see if we can hit 430-435rwhp sae
The result was 424 @ 6500 SAE torque was probably in the 370 range...the dyno was reading spikes and giving a high number.
So without further adeu, here is the graph and vids....
First the Pull: http://www.horsepowerengineering.com/media/MOV01342.MPG
Here's the cam at idle: http://www.horsepowerengineering.com/media/MOV01344.MPG
and the dyno graph:
To start with....i was crossing my fingers for 400-405 at the wheels with the new setup, especially since i was going to be running the Kooks 1 7/8ths, and running through the exhaust(NO CUTOUT).
The setup is a Kooks, O/R Y, Borla C/B, FAST 90mm intake/throttle body,Z06MAF and of course, the HPE's "S" cam.
Car was dynoed in street driving form-belt etc all in place. We will dyno with a cutout installed and open soon, and see if we can hit 430-435rwhp sae
The result was 424 @ 6500 SAE torque was probably in the 370 range...the dyno was reading spikes and giving a high number.
So without further adeu, here is the graph and vids....
First the Pull: http://www.horsepowerengineering.com/media/MOV01342.MPG
Here's the cam at idle: http://www.horsepowerengineering.com/media/MOV01344.MPG
and the dyno graph:
#7
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: NW H-town
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GO4URS
Congrats!!! I bet that Mustang is staying at home alot more now, isn't it???
Trending Topics
#8
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: NW H-town
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BigBronco
congrats J... told you it would make good power!
#11
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: NW H-town
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Onyx Z
Nice numbers man!!!
#12
TECH Addict
iTrader: (3)
Join Date: Jan 2003
Location: Houston/College Station, TX
Posts: 2,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SJRTX
are you the guy that revved at me the other day on huffmeister? i was at the light, and a black z was going the other way.
Not sure if you remember, but I was there that night at Cici's a while back with Jimmy, Gray, Raf, and all of them.
#16
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: NW H-town
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by XFACTOR
Nice #'s man keep the mods coming!!!!!!! congrats good looking camaro too. I miss mine but love my truck.
#18
TECH Addict
iTrader: (3)
Join Date: Jan 2003
Location: Houston/College Station, TX
Posts: 2,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SJRTX
ok, this was like a week and a half or so ago. i just remember black Z, billet grille, we both looked at each other and the guy revved at me lol.
#20
TECH Senior Member
iTrader: (2)
Join Date: Sep 2003
Location: Houston
Posts: 10,591
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 01 Red WS6
Nice numbers. I was looking into this cam for my car. How does it idle? I wanted to look at the vids but stupid work computer won't let me
since the cam is on a 115 LSA, it has very smooth idle characteristics, but it can be a very agressive and choppy idle. It is all in the tuning