Pics of 17x11's on a lowered car.
#4
I have 315/35/17, I lowered w/ the pro kit. my fenders would cut the corner of my pass. side tire on occasion but I rolled the fender lip with a small hammer and made it into a nice curve. havent noticed a problem since. (fender lip not seen in the pics, I just did it). I also have an adjustable PHB but only it was ok w/ the stock length.
heres some pics of mine
http://www.darmer.com/pictures.htm
heres some pics of mine
http://www.darmer.com/pictures.htm
#6
Thread Starter
12 Second Club
iTrader: (7)
Joined: Apr 2004
Posts: 719
Likes: 0
From: San Benito, TX
Originally Posted by Strini SS
I have Pics in my Sig, I have 315/35/17(17*11) and the cars lowered, YOu do have to roll the fenders and bang in the inner wall
Brandon
Brandon
Trending Topics
#9
Originally Posted by RGVWS6
Might get some. Do they rub?? Gonna get 315/35/17 tires. Anyone running anything else??
https://ls1tech.com/forums/vehicles-sale-lsx-powered-only/255063-fs-2000-ws6-pics-new-price.html check it out.. wildbills car!!
Last edited by stevensLS1; 03-07-2005 at 09:30 PM.
#10
17x11 ZR1's, 50mm offset. Lowered with LG G2 springs.
Fronts needed 7/32" spacer, griding of the spindle nubbin (take a wheel off you'll see it up near the UCA), and longer studs (better safe than sorry).
Rear fenderwells need to be hammered with love I'd show you a pic of where, but I don't have any. The general area is the inner fenderwell, towards the front of the car, about 1/3 of the way down. If you had a 5-spoke ZR1 wheel on there, it'd be almost in line with the northwest pointing spoke.
Fronts needed 7/32" spacer, griding of the spindle nubbin (take a wheel off you'll see it up near the UCA), and longer studs (better safe than sorry).
Rear fenderwells need to be hammered with love I'd show you a pic of where, but I don't have any. The general area is the inner fenderwell, towards the front of the car, about 1/3 of the way down. If you had a 5-spoke ZR1 wheel on there, it'd be almost in line with the northwest pointing spoke.
#11
Originally Posted by stevensLS1
hey do a search here for cars for sale and look for wildbills car his old one was lowered with 315s. car was player bill! it will be missed!
https://ls1tech.com/forums/showthread.php?t=255063 check it out.. wildbills car!!
https://ls1tech.com/forums/showthread.php?t=255063 check it out.. wildbills car!!
#12
heres a pic of 17x11s. on my car 315/35/17 tires http://community.webshots.com/photo/...74539023wGgjjG
#13
Originally Posted by WildBills WS6
Hey brandon Im sure he could have done a search and found a 100000 pics. Might wanna let him know
I'm sure he could have, but he also doesn't make 5-10 pointless post on a weekly bases..
WildBills WS6 Pointless threads
I may sell my car, I'm getting a GTO, I got a pocket bike, I fell off my pocket bike, heres pics when i fell off my pocket bike,I getting a chopper(yes the same guy that fell off the pocket bike) what does Borla look like on a f-body, how does borla sound on a f-body, I have friend with a Vett, what catback sounds good on a Vett, what wheels should I get, Etc.... ( It goes on and on, and on).
Here is a section on the site, that fits your questions
Introductions & Greetings
Last edited by Strini SS; 03-08-2005 at 07:43 AM.
#16
Originally Posted by Strini SS
I'm sure he could have, but he also doesn't make 5-10 pointless post on a weekly bases..
WildBills WS6 Pointless threads
I may sell my car, I'm getting a GTO, I got a pocket bike, I fell off my pocket bike, heres pics when i fell off my pocket bike,I getting a chopper(yes the same guy that fell off the pocket bike) what does Borla look like on a f-body, how does borla sound on a f-body, I have friend with a Vett, what catback sounds good on a Vett, what wheels should I get, Etc.... ( It goes on and on, and on).
Here is a section on the site, that fits your questions
Introductions & Greetings
WildBills WS6 Pointless threads
I may sell my car, I'm getting a GTO, I got a pocket bike, I fell off my pocket bike, heres pics when i fell off my pocket bike,I getting a chopper(yes the same guy that fell off the pocket bike) what does Borla look like on a f-body, how does borla sound on a f-body, I have friend with a Vett, what catback sounds good on a Vett, what wheels should I get, Etc.... ( It goes on and on, and on).
Here is a section on the site, that fits your questions
Introductions & Greetings
i couldn't have said it any better. Ive been saying this for how long?
#18
www.projecttransam.com Projecttransam.com, theres a bunch of info on this. i think it is in the cosmetic section
#20
Originally Posted by Strini SS
I'm sure he could have, but he also doesn't make 5-10 pointless post on a weekly bases..
WildBills WS6 Pointless threads
I may sell my car, I'm getting a GTO, I got a pocket bike, I fell off my pocket bike, heres pics when i fell off my pocket bike,I getting a chopper(yes the same guy that fell off the pocket bike) what does Borla look like on a f-body, how does borla sound on a f-body, I have friend with a Vett, what catback sounds good on a Vett, what wheels should I get, Etc.... ( It goes on and on, and on).
Here is a section on the site, that fits your questions
Introductions & Greetings
WildBills WS6 Pointless threads
I may sell my car, I'm getting a GTO, I got a pocket bike, I fell off my pocket bike, heres pics when i fell off my pocket bike,I getting a chopper(yes the same guy that fell off the pocket bike) what does Borla look like on a f-body, how does borla sound on a f-body, I have friend with a Vett, what catback sounds good on a Vett, what wheels should I get, Etc.... ( It goes on and on, and on).
Here is a section on the site, that fits your questions
Introductions & Greetings