Arlington People
#1
Arlington People
anyone know a good machine shop around the area to take my engine in so they can fix the oil pan bolt holes. I need them helicoil.
also if you have done this to your car, how much am I looking to pay for the work. I am taking the engine out myself.
thanks in advance
also if you have done this to your car, how much am I looking to pay for the work. I am taking the engine out myself.
thanks in advance
#2
also
if anyone would be willing to help me out on Saturday morning to complete the drop of the engine from the bottom I would apreciate it. I am a little confused about some details. I am about 90% done. there will be beer and pizza, thank a lot fellas
David
if anyone would be willing to help me out on Saturday morning to complete the drop of the engine from the bottom I would apreciate it. I am a little confused about some details. I am about 90% done. there will be beer and pizza, thank a lot fellas
David
#7
where is charles machine shop located at, do you have the physical address or a phone number handy by any chance?
I will tear it down this saturday and hopefully get it there asap if they are opn on the weekends.
I will tear it down this saturday and hopefully get it there asap if they are opn on the weekends.
Trending Topics
#8
Originally Posted by 98hc4mula
anyone know a good machine shop around the area to take my engine in so they can fix the oil pan bolt holes. I need them helicoil.
also if you have done this to your car, how much am I looking to pay for the work. I am taking the engine out myself.
thanks in advance
also if you have done this to your car, how much am I looking to pay for the work. I am taking the engine out myself.
thanks in advance
#9
ok here is an update and some more questions
I taled to a machine shop and he said that he needs the block to be tore down to a bare short block, so the heads need to come off and the accessories.
now the thing is that I have arp bolts and I really dont want to take those out again, they were a pain to put on.
also I want to know if I can reuse the same head gaskets. they are brand new, but can they be reused....
thanks again
David
I taled to a machine shop and he said that he needs the block to be tore down to a bare short block, so the heads need to come off and the accessories.
now the thing is that I have arp bolts and I really dont want to take those out again, they were a pain to put on.
also I want to know if I can reuse the same head gaskets. they are brand new, but can they be reused....
thanks again
David
#10
Charles is kind of a ********, if you go in there and dont know your **** prepare to be belittled, he does good work tho. Yahoo yellowpages works wonders
Charles Automotive Machine
(817) 277-6409 2230 W Division St
Arlington, TX Map
Charles Automotive Machine
(817) 277-6409 2230 W Division St
Arlington, TX Map
#11
I did talk to Charles, I told him I was going to take the engine in early next week after I dissasemble it. He said he was going to try to get it to me asap. I hope everything goes smoothly
#14
Originally Posted by 98hc4mula
anyone know a good machine shop around the area to take my engine in so they can fix the oil pan bolt holes. I need them helicoil.
also if you have done this to your car, how much am I looking to pay for the work. I am taking the engine out myself.
thanks in advance
also if you have done this to your car, how much am I looking to pay for the work. I am taking the engine out myself.
thanks in advance