yourdaddy

-83mm 1.08AR
-Custom Fabbed Tubular log Header
-4 1/2" downpipe stepped to 3"
-2 1/2"crossover piping
-includes all cold side piping
-Tial 44MM wastegate
-Tial 50MM blow off valve
-Greddy Profec Type B boost controller
- 3" Air to Air Intercooler (HUGE)
core length : 30"
core height : 14"
core thickness : 4"
inlet/outlet size : 3"
end to end length: 34.5"
-All custom stainless braided feed lines -4 feed, -10 return
-All Couplers, clamps and installation hardware

Going to go nitrous untill finish the twin turbo kit that I am building. This is a complete kit ready to bolt on it takes about 3 hours to install. You have relocate the computer under the dash, cut a 4 inch hole in the drivers side area where the stock air box and overflow can was and ding the fenderwell where the turbo sets. I have been a 6.90 at 113 mph in the 8th and an 11.0 at 132 both on wore out drag radials. On stock cam and heads.

3700.00 Firm

Parker TX

iTrader: (16)

Do you have pics?

yourdaddy

There are pics in the for sale section of this forum

yourdaddy

Here is a vid http://www.youtube.com/watch?v=PJt00PZ9wxU

big thumper122

iTrader: (1)

would you consider a partial trade for a nitrous system plus cash? email me and we can discuss it if you're into it. Can you fit a filter in there? Didn't look like much room.

yourdaddy

I have a cold fusion 90mm plate kit on the car and a cold fusion fogger that i am plumbing this week.

big thumper122

iTrader: (1)

what about an air filter on that setup?

yourdaddy

A supra type mushroom will fit i just have a screen that goes in the inlet to help keep bigger debris out.

yourdaddy

I have a bunch more I just never uploaded

http://www.powertvonline.com/user_vi...l.php?mId=1841

http://www.powertvonline.com/user_vi...il.php?mId=857

fubarredz

iTrader: (4)

Damn Jeff You Think We Can Make That Kit Fit On My Camaro.. HaHa... If I Had A GTO I'd Buy It... Good Luck..