HOOTERS @ Hulen
01-07-2008, 01:10 PM
#141
Teching In
iTrader: (1)
Join Date: Jun 2003
Location: Weatherford, TX DFW
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
A lot of nice cars up there for sure. I had some issues on the way up there. My fuel line came lose from its bracket and dropped down some causing my N20 feed line to run on the drive shaft and that rubbed a hole in it. I wanted to get some races in too. I ran a couple of times N/A but my car isn't set up for that any more at all with a 8.6:1 compression motor and turbo cams plus the A/F on my wide band was running 11.9-12.2, way too fat. Untill I put the turbo on I'll just keep the small shot of N20 on it just to give it that little extra kick. Hopefully next times I can get some runs in when everything is running right.
01-07-2008, 02:25 PM
#144
Staging Lane
Join Date: Apr 2006
Location: Philly area
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
He is faster lol Shoulda run him from a dig.
I had the Gold regal only the vet was interested in a run from a slow roll. I really am not interested in a roll race. But if you catch me cruising down the highway you might get lucky once in a while.
I'll be happy to run you 1/8 or 1/4 from a dig with a 231 V6 and 3800lbs.
I had the Gold regal only the vet was interested in a run from a slow roll. I really am not interested in a roll race. But if you catch me cruising down the highway you might get lucky once in a while.
I'll be happy to run you 1/8 or 1/4 from a dig with a 231 V6 and 3800lbs.
never ran this guy, he was chilling in the lot... just small talk with him. I'm down for a track gtg too. I only ran a handfull of times so not too much experience there. mostly street runs.
01-07-2008, 02:29 PM
#145
Teching In
Join Date: Jan 2008
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
well, if that dump is open , Im not racing you..lol.. Thanks for the warning..
Man, we should have went over to our good spot .. that service road was garbage.. we are lucky we didnt swap paint 2 or 3 times.. my tire gauge was jacked up.. i dropped too much air out.. thats why it was all over the place up top..ooppsss..
01-07-2008, 03:16 PM
#148
Teching In
Join Date: Jan 2008
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
here is one leavin on the motor... just about pulls it.. couple of guys said it did.. who knows.. But yeah, it leaves hard as hell..
I know , the undercarriage looks like ****.. Im lazy... and i cant get the wife out of it long enough..lol
I know , the undercarriage looks like ****.. Im lazy... and i cant get the wife out of it long enough..lol
01-07-2008, 04:07 PM
#149
11 Second Club
iTrader: (9)
Join Date: Nov 2004
Location: Thornton, CO
Posts: 1,360
Likes: 0
Received 0 Likes
on
0 Posts
Been told my car has pulled a tire as well. Also no proof. Still haven't gotten off a pass without spinning or a bog though.
Mastering the ever changing M6 set-up I have has taken quite some time.
7.706 at 91MPH (5800 feet)
Mastering the ever changing M6 set-up I have has taken quite some time.
7.706 at 91MPH (5800 feet)
01-07-2008, 04:26 PM
#150
Yeah it was good hangin with you guys for sure! Looks like that could shape up to be a regular gig.
No doubt there will be some righteous track action this year. Those old school boys that came out really know how to lay it down...
g
No doubt there will be some righteous track action this year. Those old school boys that came out really know how to lay it down...
g
01-07-2008, 04:49 PM
#151
Teching In
Thread Starter
Join Date: Sep 2006
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
01-07-2008, 05:20 PM
#153
Teching In
Join Date: Jan 2008
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
01-08-2008, 01:55 AM
#157
Teching In
iTrader: (1)
Join Date: Jun 2003
Location: Weatherford, TX DFW
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I'll take $500 it has a polished intake and these are the specs.
TA63 Precision Ball Bearing .63 AR 6376 700 hp It is on the car now Ihave it set to peak at 28 psi usuall hits around 26.5/27.5 in high. I did hit 29.8 last night on the highway on the way home a little more than I wanted the chip is for 26/28.
"S" compressor cover with 4" inlet and 2.5"
TA63 Precision Ball Bearing .63 AR 6376 700 hp It is on the car now Ihave it set to peak at 28 psi usuall hits around 26.5/27.5 in high. I did hit 29.8 last night on the highway on the way home a little more than I wanted the chip is for 26/28.
"S" compressor cover with 4" inlet and 2.5"
01-08-2008, 01:59 AM
#158
Teching In
iTrader: (1)
Join Date: Jun 2003
Location: Weatherford, TX DFW
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Phoenix makes some good stalls. I am pretty good friends with Scott over there real good guy.
Like Ole G is over at Ace.
Yeah Mark we were pretty lucky on that road al I did was pedal pedal pedal. I could ran an 8.0 on a bike as hard as I was pedaling lol!
Like Ole G is over at Ace.
Yeah Mark we were pretty lucky on that road al I did was pedal pedal pedal. I could ran an 8.0 on a bike as hard as I was pedaling lol!
01-08-2008, 07:08 AM
#159
9 Sec. Club!!!
iTrader: (1)
Join Date: Jul 2004
Location: HEB TX
Posts: 1,492
Likes: 0
Received 0 Likes
on
0 Posts
I'll take $500 it has a polished intake and these are the specs.
TA63 Precision Ball Bearing .63 AR 6376 700 hp It is on the car now Ihave it set to peak at 28 psi usuall hits around 26.5/27.5 in high. I did hit 29.8 last night on the highway on the way home a little more than I wanted the chip is for 26/28.
"S" compressor cover with 4" inlet and 2.5"
TA63 Precision Ball Bearing .63 AR 6376 700 hp It is on the car now Ihave it set to peak at 28 psi usuall hits around 26.5/27.5 in high. I did hit 29.8 last night on the highway on the way home a little more than I wanted the chip is for 26/28.
"S" compressor cover with 4" inlet and 2.5"
01-08-2008, 07:43 AM
#160
Teching In
Thread Starter
Join Date: Sep 2006
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts