2 post lift recommendations
#1
On The Tree
Thread Starter
Join Date: Mar 2005
Location: Missouri
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
2 post lift recommendations
I am getting ready to buy a lift. I have been told by a couple people not to buy the cheap ones you can find on the internet that aren't certified. i want to know some feed back on anyone who has a chinese made lift and whether or not they've had problems. I got 14' sidewalls, so no clearance issues. Thanks!
#2
TECH Enthusiast
iTrader: (9)
my uncle has a backyard buddy. its a 4 post lift but works great. backyard buddy had never had a failure with any of their lifts throughtout their history. check their website to see if they make a 2 post lift. i wouldnt trust my car on any of those crap lifts that you can get.
#5
On The Tree
iTrader: (1)
Join Date: Oct 2008
Location: NE PA
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Reply
I have a 9,000 lb. Mohawk lift and couldn't be any happier with it. Make sure that you have enough ceiling height and the concrete is deep enough and strong enough for a lift. This is one thing that you do not want to skimp on. Cheaper is NOT better. Another lift that is quite popular is the Bend Pak although I personally do not have any experience with it. One advantage to a lift is that one car can be stored on the lift in the air during the winter months and one car can be underneath. Hope this helps in your decision.
Rich
Rich
#6
On The Tree
iTrader: (1)
Join Date: Oct 2008
Location: NE PA
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Reply
Another thing to remember is if you buy the drive on style it is a little harder to change or rotate the tires. I personally don't like them because I rotate my tires with every oil change which is every 2,500 miles.Just my opinion.
Rich
Rich
Trending Topics
#8
TECH Senior Member
iTrader: (1)
I have a Gemini. Bought it used. I'm happy with it. It'll lift everything from my old Fiero to my Suburban without a problem. It's certainly not as nice or as expensive as a Mohawk, I'd put it on par with a BendPak. Just don't buy the cheapest thing you can find out there (Chinese steel junk), and you should be OK.
#11
Direct Lift PRO-10 from Greg Smith in Indiana.
I'm a homeowner and only use it occasionally so it's fine for me. Assymetrical and will lift the wife's Diesel Excursion!!!
Was $1750 at the time!
I'd buy a ROTARY if price were not an issue.
I'm a homeowner and only use it occasionally so it's fine for me. Assymetrical and will lift the wife's Diesel Excursion!!!
Was $1750 at the time!
I'd buy a ROTARY if price were not an issue.
#12
TECH Senior Member
iTrader: (14)
And just before Christmas, there were some KILLER deals on them.
I bought a North American 10K Asymetrical for $1400 delivered and installed.
#14
TECH Enthusiast
iTrader: (9)
Join Date: Feb 2007
Location: hamden, ct
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
rotary here as well, though i know people with some of the lower end lifts that have no issues. a good lift will more than pay for itself so just like tools i wouldnt trust the basement bargains. also you gotta wonder if something does happen or you need to replace a part, is CHINALIFT going to still be in buisness? just some food for thought...
#16
On The Tree
Thread Starter
Join Date: Mar 2005
Location: Missouri
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
#18
TECH Enthusiast
iTrader: (9)
Join Date: Feb 2007
Location: hamden, ct
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
im not saying the cheap ones are going to fail (and that a top dollar lift is never going to) but i feel better having 2 tons of steel over my head on my proven rotary than with a harbor freight brand. all MHO of course