Roll Cage Design
12-13-2006 | 07:31 AM
#21
TECH Apprentice
Joined: Jan 2002
Posts: 384
Likes: 0
From: Murphy, TX
Originally Posted by 2002blackZ
With proper direction, a roll bar is a great project and very rewarding to do yourself.
Thanks for the comments.
12-14-2006 | 06:14 PM
#22
Originally Posted by Mikey Crizzle
Im a student at Wyotech and I get a FAT discount on chrome moly. So I figured why not throw a roll cage in it. I'm runnin stock right now but in the future she's gonna be stroked n turboed. Estimated roll cage cost $150...so why not??
12-14-2006 | 07:44 PM
#23
could always get a buddy that wants one too, buy a cage and get the measurments off of that, or just buy a cheap 4 point, copy the measurments and sell it and then get your own tubing and bend it yourself...seems like taking one step forward and 2 back, but would be a good learning experience, and you could always just make it a bolt in until you get good at welding and then cut it and reweld it to the floor later down the road.
12-15-2006 | 01:37 PM
#24
Originally Posted by WheelsUp84z
could always get a buddy that wants one too, buy a cage and get the measurments off of that, or just buy a cheap 4 point, copy the measurments and sell it and then get your own tubing and bend it yourself...seems like taking one step forward and 2 back, but would be a good learning experience, and you could always just make it a bolt in until you get good at welding and then cut it and reweld it to the floor later down the road.
