Tool Help
Thread Starter
TECH Addict
Joined: Apr 2002
Posts: 2,417
Likes: 0
From: Waldwick, NJ
Tool Help Would this cover pretty much every bolt on an F-Body?
http://buy1.snapon.com/catalog/item....re&dir=catalog
Contemplating this purchase. I'll be getting a 1/2" Snap On cordless impact and figured I could use an adapter to attach these
http://buy1.snapon.com/catalog/item....re&dir=catalog
Contemplating this purchase. I'll be getting a 1/2" Snap On cordless impact and figured I could use an adapter to attach these
not sure you'll need a 20 but might be good to get it anyway to round out the set.
a majority of stuff on any metric bolted gm i've ever worked on has been 7, 8, 10, 13, 15, and 18. with some odds and ends interspersed in there.
a majority of stuff on any metric bolted gm i've ever worked on has been 7, 8, 10, 13, 15, and 18. with some odds and ends interspersed in there.
Originally Posted by 2002 Trans Am
I'm concerned about the semi-deep. There is nothing that pisses me off more than not having a socket that is deep enough
I hate having to get back up and find a bigger socket, then upon realizing I dont own correct socket having to get an adapter to use 1/2" or 3/8" instead of whatever I was using.
-Lurius
