Lets see your garage and tool collection!
#61
Well I am working on a blue print for a show right now.
It's going to be a 52x72(was an already existing house slab, that I am just adding a couple inches of concrete to). I will have the roof 15 feet and the arch is @ like 25 or so I think(can't remember the exact size of the trusses I looked @) I'm gunna have 2 garage doors( one on the front and one on the side and then a 3rd or a paint booth in the back corner of the shop. I will have a lift in the front section with all my tools and misc stuff, the rear part will be a paint and body section.
Josh S.
It's going to be a 52x72(was an already existing house slab, that I am just adding a couple inches of concrete to). I will have the roof 15 feet and the arch is @ like 25 or so I think(can't remember the exact size of the trusses I looked @) I'm gunna have 2 garage doors( one on the front and one on the side and then a 3rd or a paint booth in the back corner of the shop. I will have a lift in the front section with all my tools and misc stuff, the rear part will be a paint and body section.
Josh S.
#62
heres the shop where we go dyno sometimes....its bad azz!
heffners performance, builds some of the fastest vipers in the world (gets them shipped in from other countries!)
heffners performance, builds some of the fastest vipers in the world (gets them shipped in from other countries!)
Last edited by EVIL; 10-27-2003 at 03:49 PM.
#64
Dubbed the'Toy Box' for the SS's to reside in. 30' deep, 26' wide. 16' front door 8' back door. Just installed cabinets and countertops, got a fridge for the required refreshments, hung some shelves, cut the remainder of the Race Deck, hung some required Camaro decor. Now it is a proper home for the SS's
Heres some pics . .
Still not complete, but wanted to share - again! .
Heres some pics . .
Still not complete, but wanted to share - again! .
#65
Originally Posted by Camaroholic
No lift yet, but it's got potential. 30 x 30 shop with a 20 x 30 shed area extended off of it. Insulated, 240V, full slab. A complete wreck right now until I get some big parts shelves. Fenders, trunk pans, and large interior pieces just don't stack well.
http://www.akmcables.com/Image20.jpg (before I 'moved in' to it)
And yes, this is the reason we bought our house. This shop only added about $4k to the price of the house (when comparing $/sq ft of surrounding homes).
-Andrew
http://www.akmcables.com/Image20.jpg (before I 'moved in' to it)
And yes, this is the reason we bought our house. This shop only added about $4k to the price of the house (when comparing $/sq ft of surrounding homes).
-Andrew
joel
#66
Well my new house will be finished in May/June next year. 4 Bedroom, 2.5 bath 3 car garage, 2400sqft of living space and a 3 car garage 28' wide X 23' deep.
My current garage is only a 2 car 18' wide X 21' deep but it has my Wife's 99 camaro and an 84 Rolls Royce Silver Spur in it, my baby is sits outside for now.
My current garage is only a 2 car 18' wide X 21' deep but it has my Wife's 99 camaro and an 84 Rolls Royce Silver Spur in it, my baby is sits outside for now.
#71
That jack barely fits under the car. I think I am going to get one of those new Aluminum Race Jacks. They are lower to fit under the car better. Sam's Club has them for $139.00 I think...
Last edited by 2001 Pewter WS6; 11-05-2003 at 06:04 PM.
#75
Dammit ... my links got screwed up ... so I took some new pics of Warren Motorsports Complex ...
Memorabilia ....
The car, at rest. My 3 tier tire cart just on the other side. Each rack will hold 4 315s or 6 275s
Shop supplies, tool storage and my wonderful shop chair made from a Ford P/U seat
Spare parts ... intake to brake pads ... cats to radiator hoses. When you live in the sticks, parts just ain't down the street ...
Welding/cutting cart
General storage
Toolbox and entertainment center ... that's a redundant phrase ...
Notice the start page ....
BFB (Big Fvcking Bench) w/ storage bins. These bins have nuts, bolts, washers, electrical connectors, bulbs ... anything small and segregate-able ...
Fabrication area
Fab area ...
Inside, looking towards the front
From the front ... that's a 160' of concrete or burnout box!
Metal laydown ...
From the back ...
Tour complete. Donations accepted ...
Memorabilia ....
The car, at rest. My 3 tier tire cart just on the other side. Each rack will hold 4 315s or 6 275s
Shop supplies, tool storage and my wonderful shop chair made from a Ford P/U seat
Spare parts ... intake to brake pads ... cats to radiator hoses. When you live in the sticks, parts just ain't down the street ...
Welding/cutting cart
General storage
Toolbox and entertainment center ... that's a redundant phrase ...
Notice the start page ....
BFB (Big Fvcking Bench) w/ storage bins. These bins have nuts, bolts, washers, electrical connectors, bulbs ... anything small and segregate-able ...
Fabrication area
Fab area ...
Inside, looking towards the front
From the front ... that's a 160' of concrete or burnout box!
Metal laydown ...
From the back ...
Tour complete. Donations accepted ...
#77
Just snaped a few quick pics
Dyno room exhuast and water tank shed for dyno
Part of the shop, you cant see the car stacker, engine room, or dyno room, parts room upstairs, machine/fab area or lobby. Also has an in-house machine shop
Blurry pic
.
.
.
.
.
.
Okay I'm joking, thats a race shop my friend worked and where he built his Cobra...My garage is here, cant see much car is in the way, garage is a horrible mess.
Dyno room exhuast and water tank shed for dyno
Part of the shop, you cant see the car stacker, engine room, or dyno room, parts room upstairs, machine/fab area or lobby. Also has an in-house machine shop
Blurry pic
.
.
.
.
.
.
Okay I'm joking, thats a race shop my friend worked and where he built his Cobra...My garage is here, cant see much car is in the way, garage is a horrible mess.
#78
Originally Posted by 2001 Pewter WS6
That jack barely fits under the car. I think I am going to get one of those new Aluminum Race Jacks. They are lower to fit under the car better. Sam's Club has them for $139.00 I think...
#80
You no longer need to host images. They can now be "attached". There is a link called "Manage Attachments" above the "Submit Reply" button. This is not availably in the quick replay at the bottom of the page. You have to click the "Reply" button under someone's post.
--VIP1
--VIP1