99 Formula, M6, forged bottom end,h/c/i/TB,12 bolt,lvl 2 6spd
#1
99 Formula, M6, forged bottom end,h/c/i/TB,12 bolt,lvl 2 6spd
NEW PRICE!!! $7500 FIRM!!!
LOTS OF AFTERMARKET PARTS!!!
FORGED BOTTOM END, BUILT T56, MOSER 12 BOLT +++ MORE!!
i hate to do this, and hoped that i never would have to but its time to let the formula go..i have bills piling up..and this winter is comming and up here in the north country its nothing to take lightly..between a bankruptcy, fuel oil, propane, the cost of keeping the driveway plowed out, etc...and a few other things that add up..its just not pratical to keep the car right now...
I guess its time has come for her to find a new owner..i love the car and hate to get rid of her...i have put an ungodly amount of money in her..anybody who mods their cars knows what i am talking about..i will post up a complete list of mods, or as much as i possibly can remember..and i am going to post up all the pics i have..
Normally there is no way in hell i would come up off this car...i paid $13,500 for her and have replaced/rebuilt the entire drivetrain..from a forged shortblock, to ported and plished 241 heads, to Tick performance rebuilding the T56 and adding a 12 bolt moser...
I love my car, but i have got to take care of my family and right now its a sacrafice that i have to make..i dont know if i will ever own another one...but i know i need to do the right thing by them.. anyways i will commence to posting all the pics that i have..and will post any further upon request...
Looking for 8K and may entertain any serious offers...the next post will be a list of the mods and what the car needs...followed by pics
LOTS OF AFTERMARKET PARTS!!!
FORGED BOTTOM END, BUILT T56, MOSER 12 BOLT +++ MORE!!
i hate to do this, and hoped that i never would have to but its time to let the formula go..i have bills piling up..and this winter is comming and up here in the north country its nothing to take lightly..between a bankruptcy, fuel oil, propane, the cost of keeping the driveway plowed out, etc...and a few other things that add up..its just not pratical to keep the car right now...
I guess its time has come for her to find a new owner..i love the car and hate to get rid of her...i have put an ungodly amount of money in her..anybody who mods their cars knows what i am talking about..i will post up a complete list of mods, or as much as i possibly can remember..and i am going to post up all the pics i have..
Normally there is no way in hell i would come up off this car...i paid $13,500 for her and have replaced/rebuilt the entire drivetrain..from a forged shortblock, to ported and plished 241 heads, to Tick performance rebuilding the T56 and adding a 12 bolt moser...
I love my car, but i have got to take care of my family and right now its a sacrafice that i have to make..i dont know if i will ever own another one...but i know i need to do the right thing by them.. anyways i will commence to posting all the pics that i have..and will post any further upon request...
Looking for 8K and may entertain any serious offers...the next post will be a list of the mods and what the car needs...followed by pics
Last edited by Black FormulaLs1; 11-11-2009 at 12:18 PM. Reason: trying to get the car sold..
#2
CHASSIS GOODIESoodies...
BMR Torque arm
BMR Panhard Rod
BMR LCA
BMR D/S Loop
BMR SFC
SLP STB
ENGINE--
Walboro 255 fuel pump
Stock Injectors
LS6 Intake
80MM BBK TB
Patriot gold .650 valve springs
titanium locks and retainers
Ported 241 heads 2.02 / 1.94 valves
Forged Mahle pistons
Hellfire Rings
Forged Mahle rods
Clevite 77 Bearrings throught
New SLP Timing chain
Lunati cam 234/236 .050 .544/.545 112 LSA
Ported LS6 oil pump
Comp cam Lifters
Crane Pushrods
TA lower Air dam
SLP Lid
K&N Air filter
NGK TR6
MSD Plug Wires
160 Thermostat
EXHAUST-
SLP LT's, ORY, LDMTH 1 exhaust with SLP Tips
SUSPENSION--
Bilstein shocks
eibach Pro kit springs
TRANS and REAR END--
Moser 12 bolt 3:73 gears 31 spline axles Detroit locker diff
T56 Stage 2 by Tick Performance
Z06 Slave cylinder w/ *Drill mod*
Ram VDS Clutch pkg
Pro 5.0 shifter w/ hurst shift ball
APPEARANCE--
U.S.Exotics SuperHawk hood
Speedline wheels
hawks HPS brake pads
Stainless steel brake lines
Baer Eradispeed Slotted/drilled zinc plated rotors
01 Trans am front seats
Alpine CD Player w/ mp3 capability
NOT INSTALLED--
**2x 17.9.5 gunmetal ZR1 corvette wheels w/ SLP centercaps and Tires
**1 set of RED FRC with black corvette lettering on them
** TSP True duahl exhaust w/ bulletts
**A/C is not installed but is complete
** BMR DriveShaft Loop
She has the Skip Shift already taken out of the ECM.
The car needs---
The car also needs a COMPLETE TUNEshe is my daily driver however she seriously needs to be on a dyno by a compitent tuner.
The Drivers Side floorboard in the carpet has a couple of holes in it...if you choose to put down floor matts then you wont ever see them...i have found carpet for $75 but havent bought it..
The passenger side door panel tabs around the biger speaker has come loose but damned if i know how to fix it..i was going to do a whole leather wrap on the entire enterior but again finances have not come my way to complete that..
The drivers side fender has a small chip at the end of it..
The passengerside headlite motor makes that damned grinding noise...
and the radio antenna needs to be replaced, * dont let other people help you with a car cover..*
and the power steering line just started to crap on me, the pump works fine but the line is shot..
thats all i can think of right now...now on to posting the pics..
BMR Torque arm
BMR Panhard Rod
BMR LCA
BMR D/S Loop
BMR SFC
SLP STB
ENGINE--
Walboro 255 fuel pump
Stock Injectors
LS6 Intake
80MM BBK TB
Patriot gold .650 valve springs
titanium locks and retainers
Ported 241 heads 2.02 / 1.94 valves
Forged Mahle pistons
Hellfire Rings
Forged Mahle rods
Clevite 77 Bearrings throught
New SLP Timing chain
Lunati cam 234/236 .050 .544/.545 112 LSA
Ported LS6 oil pump
Comp cam Lifters
Crane Pushrods
TA lower Air dam
SLP Lid
K&N Air filter
NGK TR6
MSD Plug Wires
160 Thermostat
EXHAUST-
SLP LT's, ORY, LDMTH 1 exhaust with SLP Tips
SUSPENSION--
Bilstein shocks
eibach Pro kit springs
TRANS and REAR END--
Moser 12 bolt 3:73 gears 31 spline axles Detroit locker diff
T56 Stage 2 by Tick Performance
Z06 Slave cylinder w/ *Drill mod*
Ram VDS Clutch pkg
Pro 5.0 shifter w/ hurst shift ball
APPEARANCE--
U.S.Exotics SuperHawk hood
Speedline wheels
hawks HPS brake pads
Stainless steel brake lines
Baer Eradispeed Slotted/drilled zinc plated rotors
01 Trans am front seats
Alpine CD Player w/ mp3 capability
NOT INSTALLED--
**2x 17.9.5 gunmetal ZR1 corvette wheels w/ SLP centercaps and Tires
**1 set of RED FRC with black corvette lettering on them
** TSP True duahl exhaust w/ bulletts
**A/C is not installed but is complete
** BMR DriveShaft Loop
She has the Skip Shift already taken out of the ECM.
The car needs---
The car also needs a COMPLETE TUNEshe is my daily driver however she seriously needs to be on a dyno by a compitent tuner.
The Drivers Side floorboard in the carpet has a couple of holes in it...if you choose to put down floor matts then you wont ever see them...i have found carpet for $75 but havent bought it..
The passenger side door panel tabs around the biger speaker has come loose but damned if i know how to fix it..i was going to do a whole leather wrap on the entire enterior but again finances have not come my way to complete that..
The drivers side fender has a small chip at the end of it..
The passengerside headlite motor makes that damned grinding noise...
and the radio antenna needs to be replaced, * dont let other people help you with a car cover..*
and the power steering line just started to crap on me, the pump works fine but the line is shot..
thats all i can think of right now...now on to posting the pics..
Last edited by Black FormulaLs1; 11-11-2009 at 12:12 PM. Reason: more parts than originally listed.
Trending Topics
#19
On The Tree
iTrader: (7)
Join Date: Sep 2004
Location: Fulton IL
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Pics still work for me man. Car is DEFINITELY worth it. If i had the cash I would be all over it.
I like all the pics and details...shows your not hiding anything at all. If this doesnt sell in a week Id be really surprised
I like all the pics and details...shows your not hiding anything at all. If this doesnt sell in a week Id be really surprised
#20
yeah i know the car is worth it, and i have somebody who is not too far from me interested right now, i hate to sell the car, i have got an immense amount of time in her but priorities are priorities and the snow up here is no joke. besides i can build another one...