93 ls1 rx7
#1
93 ls1 rx7
Year: 1993
Make: Mazda
Model: RX-7
Price: $7500
Mileage: 39000
Private or Dealer Listing: Private Listing
Location (State): GA
Color: Silver
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
the car has a clear title. its a 93 silver base model with moon roof. the car runs but their are a few things that need to be wrapped up to finish her. ill list whats on the car first them talk about the needs to be addressed.
Hinson installed the engine , wiring up and making it run. All i did was the mounting hardware install and a few of the aftermarket stuff.
99 ls1 w/ t56 tranny approx 39k miles
HSC mounting equipment
hsc wiring harness mod
Ls1 edit
hsc alu. driveshaft
ls6 intake manifold

slp adj. timing chain
28.8 # injectors
lightened crank pully
comp custom cut 228 234 cam 112+4
3.90 rearend
comp springs
comp pushrods
comp retainers
spec clutch (old ones hinson is running)
ported ls6 oil pump
port and polished TB
CNC ported exhaust manifolds
Nxl nozzel nitrous system
NX 3gen upgrade kit
NX electronic nitrous guage
- extra plastic interior peices
-iv put drill/slotted rotors
new optima red top
pro 5.0 shifter w/ tri axis shifter
nxl system on the zo6 manifold
Rear tires are new MT drag radials
2 extra tires are the old rears they have plenty of tread on them.
the car runs and drives but needs to be tuned. It runs really rich. The guages need to be hooked up . When i bought the car their was a ding in the drivers side door and a ding in the front quarter panel. I was told that he hit a mail box and had to have the front fender and door worked on. upon close exam you can tell their was some body work in the drives side door area.it will need a paint job and some minor body work. i have taken a few pics of the the dings that are still on the car. Alot of the interior has been removed because i was going to sand them down and repaint them. I when ahead and bought another set of panels that go with the car. the heater core and ac are not hooked up. i noticed an electrical gremlin, the brake lights stay on. Just recently the car has been getting warm, i noticed the hinson fans havent kicked on so that needs to be programed.
This car is very quick and great to drive. It has less than 200 miles since i put the engine in are have been driving it around. I only drive in around the neighborhood . Never been raced or sprayed. im asking 7500
pics will be posted tomarrow
forgot to mention that i got a new front bumper its the racing edition. Bit also has a B&M line lock installed, apexi 4inch cat back exhaust installed. It needs to be welded up from the manifold to the rear exhaust
Last edited by ls1/7; 05-10-2010 at 09:44 AM.
#5
pics of the interior, you can see that the glove box is removed this was to install the ing wire from the ecu. the wires that you see in the pic are not used in the conversion and the glove box can be easly reinstalled. ill do i before someone comes to pick it up.
Trending Topics
#19