**TRADED**: Cammed 98 Trans Am M6 for C5 or GTO
#1
Teching In
Thread Starter
Join Date: Jun 2009
Location: Jackson, TN
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
**TRADED**: Cammed 98 Trans Am M6 for C5 or GTO
Year: 1998
Make: Pontiac
Model: Trans Am
Price: $12500
Mileage: 89202
Private or Dealer Listing: Private Listing
Location (State): TN
Color: Black
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
Hey guys just posting this out to see if there is any interest (seen a couple of c5 for f-body threads so figured this would get better coverage. I have a cammed 1998 Trans Am fully loaded, t-tops, tcs, manual 6 speed which currently has 89,202 miles as of right now. This changes daily as this is my only car, my daily driver, and I have a 48 mile round trip to commute to work (5 days a week). I've compiled a list of mods and parts replaced off the top of my head, I might be missing some small things but this is a good rundown. I do have all receipts for all the work done including parts, shop work, labor, etc. The car put down 389rwhp and 380ftpd torque on the initial tune, it is running a little rich right now as I had the intention of getting a LS6 intake on it pretty quickly but that hasn't happened yet (hopefully see 400-405rwhp+ with that and some more tuning).
the following things replaced about 60,000 miles
-all new brakes
-k&n air filter
-new rear end fluid and gasket
-new oil and filter
-new trans fluid
-new bosch 13111 o2 sensors
-new shocks
-new idler pulley
-new sony head unit with ipod conector
-new kicker speakers in doors and polk in the trunk
the following performance upgrades were added around 65,000 miles
-hooker long tube ceramic coated headers
-hooker off road y-pipe
-magnaflow catback
-DMH performance electric cutout
-fast toys lid
-slp mass airflow sensor
-strut tower brace
-RAM master cylinder
at 70,000 miles the following was done by Straightline out of New Lenox, IL. Car was also tuned when all the work was done by them, I have the receipts parts/labor and dyno print outs as well.
-custom grind comp cam 232/238 602./.609 @112
-comp R lifters
-trick flow hardened pushrods
-dual titanium springs
-ported ls6 oil pump
-c5r timing chain
-new head gaskets
-new head bolts
-all new gaskets on top end, also oil pan gasket.
at 74,000 miles the following was done.
-new ls7 clutch
-new pilot bearing
-new slave cylinder
-new driver and passenger window motors
-windows tinted (5% on the back and 15% on the sides)
at 83,xxx miles the following was done.
-new 4x C6 Z06 Replica wheels 18x9.5 gloss black with polished face/lip
-new 4x Nexen 3000 275/35/18 Tires
at 89,500 miles the following was done.
-complete overhaul of the air conditioning system (NEW not remanufactured A/C compressor, dryer, etc.).
I'm pretty picky about my car fluids are changed regularly, oils always changed about every 2,800-2,900 miles. Like I said I drive it everyday to work which clicks up the miles, I usually average around 18-20mpg every fill up. Additional photos (and higher resolution ones) are up on my flickr, Video sound quality isn't to great had to use my phone as I couldn't find my digital camera SD card.
Questions just let me know.
**TRADED TO GTODAVE**
Last edited by shr3ddermill3r; 07-28-2010 at 04:53 PM.
#4
Teching In
Thread Starter
Join Date: Jun 2009
Location: Jackson, TN
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Rick! You did some great mods to the car and had a great shop do a killer job on the cam / head work. I simply wanted to make it look and feel stock as possible to the untrained eye .
PM'd you lemons12.
PM'd you lemons12.
Trending Topics
#9
Teching In
Thread Starter
Join Date: Jun 2009
Location: Jackson, TN
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Just overhauled the A/C system (new A/C compressor, dryer, and the whole nine yards!). Blows ice cold, much better than before (compressor was making some noise).
BUMP!
BUMP!
#13
Teching In
Thread Starter
Join Date: Jun 2009
Location: Jackson, TN
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Any model really I'm not going to be picky at all. Depending on model/miles/options I'm willing to go straight across trade or trade + cash. I'm actually willing to look at an automatic as well really hope I can find a M6 in trade (love a stick anyday ).
#14
12 Second Club
Join Date: May 2010
Location: Alexandria, VA
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2003 Z06 that's looking for a good home... 80K miles. In EXCELLENT condition. It's listed on here, and just replied to a post so it's on the front page. No accidents, all factory paint. Must have been adult owned since new. Are you interested at all?
#17
hey man this is dave i talked to you two days ago and i tried to call ya last night but it took me to some weird number..ha but if your interested im down fro the trade..just give me a call regardless man.thanks!