00 TA M6 silver NY ROLLER
#1
00 TA M6 silver NY ROLLER
Year: 2000
Make: Pontiac
Model: Trans Am
Price: $2600
Mileage: 115000
Private or Dealer Listing: Private Listing
Location (State): NY
Color: Silver
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
Little body damage
3 dings PS quater
https://ls1tech.com/forums/album.php...ictureid=58548
Front clip hard to see but chip cracking in PS front corner
https://ls1tech.com/forums/album.php...ictureid=58604
Hole car, The rear springs werer replaced so it sits higher in the rear like it should
https://ls1tech.com/forums/album.php...ictureid=48515
Interior is 115k interior. Small door panel crack 1 inch long both doors. Some wear on the ds and ps seat. Rears are mint. Center console is there but the upper looks like ****.
https://ls1tech.com/forums/album.php...ictureid=48507
https://ls1tech.com/forums/album.php...ictureid=48508
https://ls1tech.com/forums/album.php...ictureid=48509
https://ls1tech.com/forums/album.php...ictureid=58600
Still with me. I have turned almost every nut on this car will give full history. I bought it in may of 2010 for 2650 with a set of shitty headers. The car had broken ball joints, tirrod ends were shot, put used tt2 on it, and abs delete kit. It was missing tons of little ****. The rear rolled and punched a hole in the floor, it was patched. The under side had surface rust(zero on body) it was stripped from the rad support to above the rear to bear metal and coated in POR 15. The stock 10 bolt was sold, I put a 9in it then yanked it. It has a stock 10bolt 3.23 gears out of a firehawk with low miles on it. The upper rad suppor with the lid insert goes with the car, ecu basket goes, t-56 cross member goes. It has the ABS delete kit but isn't wired, the wiring part goes with the car. Front and rear bumper supports are out but front can go with car. The car is light.
Needs to run t-56/ls drop out with harness rad and fans and exhaust. torque arm the front trans mount is going with the car the bracket with the 3 bolts. I have a stock DS I can send with it. The AC is gone but built it so the heat still works. 1 blown speaker in the car, I heard it but didnt chase it down.
I was really pissed when I got the car and found all my surprizes so I'm not going to do that **** to someone else. I have control arms, panhard, sfc, exhaust that I can sell with the car but your paying what they go for in the classified adds. https://ls1tech.com/forums/album.php?albumid=15299 rest of pics. Think that is the most detail you could ask for.
In 14467. 585-645-2862 Jay
Last edited by Mustang Hat'r 2; 03-02-2011 at 09:05 PM.
#5
Just have to pull master
https://ls1tech.com/forums/album.php...ictureid=64568
https://ls1tech.com/forums/album.php...ictureid=64567
https://ls1tech.com/forums/album.php...ictureid=64566
Done f-en around $2800, $2200 if you bring your own wheels
https://ls1tech.com/forums/album.php...ictureid=64568
https://ls1tech.com/forums/album.php...ictureid=64567
https://ls1tech.com/forums/album.php...ictureid=64566
Done f-en around $2800, $2200 if you bring your own wheels
Trending Topics
#9
TECH Apprentice
iTrader: (15)
i may be interested in this. a guy rearended me in my 99z last night =( and im not sure if the insurance is going to total it or what just yet. my car is immaculate and i cant stand the thought of it going to the junk yard, so i thought about buying a roller and swapping all my stuff into. i will keep you posted as i should know something in the next few days.
overall though is the car pretty clean? is the rust real bad on it or spreading? let me know you can pm if you like. thanks
overall though is the car pretty clean? is the rust real bad on it or spreading? let me know you can pm if you like. thanks
#12
To make the AC work you have to pull the dash and put your AC unit in. For abs you need to put your abs block in the car and use some fresh break line conections but you could sell the ABS delete kit. Not one wire was cut on the car its all there except the engine harness.
Jay
Jay