2001 Camaro SS M6 Moser/RPM/ ETC
#1
TECH Regular
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
2001 Camaro SS M6 Moser/RPM/ ETC
Year: 2001
Make: Chevrolet
Model: Camaro
Price: $15000
Mileage: 99000
Private or Dealer Listing: Private Listing
Location (State): IN
Color: Blue
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
I bought this car a little over 2 years ago stock with headers and have done all the mods in the last 2 years and most have under 2k on them, and the others are under 15k.
Motor-
Brand new LS6 block from gm
Forged Mahle Pistons(-4cc reliefs)
Stock rods/Crank with new bearings
EPS 234/246 111lsa
TEA Valve Springs
TEA hardened pushrods
PRC stage 1 LS6 Heads
ARP Rod Bolts
Powerbond UDP
Fuel & Air
FAST 90 Intake
NW 90mm Throttle body
FTP 98mm Lid
Delphi 85mm Maf"
42lb Injectors
Racetronix Fuel Pump W/ Harness
Pacesetter Long tubes and Y
Flowmaster merge( not installed)
Magnaflow Catback with QTP electric Cutout
Drivetrain & Suspension
RPM LVL 5 T56 w/ Viper mainshaft(200 miles)
Monster LVL 3 Clutch
Tick ADJ. Master cyl
MGW shifter
Moser 9" w/ 4.11's and Wavetrac
Dennys HD aluminum Driveshaft
Lakewood D/S loop
UMI Torque Arm,SFC's,
Spohn LCA's
Edelbrock PHB
Appearance and Misc
17x9.5 and 18x10.5 C5 Deep dish wheels
Brand New 315/30/18 falken azenis
8k HID's fogs and lows
SLP SS grille
Clear Corners
LPE Launch Controller
Raptor Shift Light w/ blue leds
Slotted rotors and ceramic pads
full poly mounts
I know theres stuff im forgetting. Like i previously said the cars not immaculate but its not a piece. It pulls hard, carries good oil pressure and never misses a beat. Its got a few flaws the underside of the front bumper is scraped up a bit, and the drives seat has a little tear, but not in the bolster, It needs an ADJ torque arm instead of just a regular non adj one. other than that i do not beleive there are any issues. its got a brand new power steering rack, and water pump. There are absolutley no Leaks on this car. its spotless underneath. Every engine seal/gaskter has been replaced. if you have any questions please ask, im not hiding anything with this car. im not pushed to sell it, nor do i completely want to but cash talks and i really am considering a vette. im not going to be real flexible on the price due to the amount of money in this and the drivetrain being built.i dont have alot of pics on this computer but heres what i have so far.
#7
TECH Resident
Join Date: Sep 2010
Location: Cartersville, Georgia
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
I had been in the market for C5Z's (the C6Z's are too rich for me) waiting for them to drop into the teens, but the wife wouldn't have let me take something that "nice" to the track. Since she pays the bills too, she certainly gets an opinion on the toys. When I am bored with the track and the SS, I will go back to searching for C5Z's. Who know's, maybe the C6Z's will be in reach at that time. In the meantime, I will keep trying to convince the wife to trade the G35S on a C6Z/C6. It has been a "no go" so far.
Good luck with your sale ... !
Good luck with your sale ... !
Last edited by BrianSF-GA; 05-31-2011 at 08:08 AM.
Trending Topics
#10
TECH Regular
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
ttt, price is obo... interested in anything LS or possibly terminators. For the more expensive cars ive got a 2002 silverado with 62k on it to go with the trade. just losing interest in the car
#14
On The Tree
Join Date: May 2011
Location: Ft Worth TX
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Nice car, would love to have the 15k but at this point I am working on saving some more G's. Im about halfway to my goal and then will be getting another SS. Good luck with it.