dreamls1

iTrader: (25)

Year: 1999
Make: Pontiac
Model: Trans Am
Price: $35000
Mileage: 96371
Private or Dealer Listing: Private Listing
Location (State): IL
Color: Black
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine

Up For sale is my 1999 Trans Am WS6. I have to sell this car do to a new baby on the way, just putting racing on the back burner for a while. This Car was build to be the nations fastest NMCA True Street race car. Everything on this car is Build for 2000+HP. Every part on this car is BRAND NEW except the Rear end, Wheels, and Tires, which have under 100 miles on them. The car has not been dyno tuned but has a base tune from Jim Moran @ Speed inc. The car is set up to run E85 Fuel. This car uses the best parts money can buy. Bring me offers. NO TRADES

99 Trans Am WS6

Enigne-

Built By AES in Chicago
Brand New 6.0 Iron Block
Callies Magnum Crankshaft
Oliver Billet Rods (Big Block rods) Rated at 2400HP
CP custom Boost Pistons
Block and Heads are O-Ringed
World Products Heads
Speed Inc TU3 Cam
Ported LS6 Oil Pump
Stock Waterpump and Steering pump
160 Degree Thermostat
Custom Catch Can that vents both Heads
ARP2000 Head Studs and Main Studs
Copper Head gaskets
Stock Oil Pan
ATI Balancer
Custom Billet Alternator relocation bracket
Griffin 3" Aluminum radiation relocated to front bumper
Custom 6061 Intake elbow
Vic Jr Intake manifold

Power Adder-

Comp Turbo Billet wheel 92mm Turbo T6
JGS 60mm Wastegate
JGS 50mm Bov
Custom A2W intercooler
3.5" Aluminum Cold side piping
5" Mild Steel Downpipe Dumped
2.5" Mild Steel Crossover pipes
6.0 Inverted truck manifolds
custom A2w intercooler icebox

Drivetrain-

FTI stage 5 Powerglide in stock case (rated at 2000+HP)
Circle D Specialties Custom Billet race Spragless Torque converter.
CSR flexplate
Arp Bolts
Steel braided Trans Lines
B&M transmission cooler with fan
PST 3.5" Chromoly Driveshaft
Midwest Chassis Fab 9" Rear End Narrowed 2.5" each side
True Spools
35 spline
Midwest Chassis Sort Torque arm
B&M Powerglide crossmember


Suspension-
Afco front coilovers
Stock rear shocks and springs
Midwest Chassis Lower control arms
Midwest Chassis Panhard bar
Midwest Chassis rear drag sway bar
Midwest Chassis Turbo Kmember
UMI Front lower control arms
Midwest Chassis 8.50 chromoly cage
Window net
Kirkey seats
Simpson Parachute
Midwest Chassis Parachute mount


Wheels and Tires-
15x3 Weld racing front wheels
15x10 Billet Specilties street lites
Micky Thompson 325/50/15 DRs
1/2 wheels studs
Stock front brakes
Strange rear brakes, calipers, rotors and pads

Fuel-
Weldon 2345-A Fuel Pump
Weldon A2040 Series Fuel Regulator
Weldon Fuel filters
-12 feed to pump
-10 feed and return lines
FIC 2000CC High Ind Injectors
Vic JR fuel rails
stock fuel Tank
Weldon 14000 Fuel pump controller

Electronics-
Stock ECU
AEM wideband
AMS-1000 with CO2 tank
MSD 2-Step
Battery Relocation to trunk

I tried and list as much as i could. If you have questions please ask.

Overall the paint is in good conditions, there is a dent in the PS rear quarter panel, and the bottom of the front bumper was cracked and repaired but will can see some damage.

This car will go into the mid to high 7s 1/4 with the right tuner.

$35,000 OBO

padge

Nice car but I think u would need a better cage to go 7's

dreamls1

iTrader: (25)

Bump it up.

forcefed6

iTrader: (7)

Agreed, that cage won't certify to even 9s

dreamls1

iTrader: (25)

The cage will cert 8.50

dreamls1

iTrader: (25)

bump it up

dreamls1

iTrader: (25)

bump it up

dreamls1

iTrader: (25)

I might part out if i can sell the Long block first.

TRMIN8R

iTrader: (42)

Cool car, but it's a LONG way from 2000hp.

SKULL

iTrader: (7)

agreed but pm me the specs and price on the long block and the turbo

dreamls1

iTrader: (25)

Bump it

dreamls1

iTrader: (25)

Anyone interested if i part it out? I will sell the roller, Complete Long block, Trubo kit , trans ect.

dreamls1

iTrader: (25)

Part out!

https://ls1tech.com/forums/parts-cla...ong-block.html

Head Hunter

iTrader: (14)

Gorgeous car - GLWS