**SOLD** 2001 Ram Air WS6 TA NBM Roller
04-05-2013, 10:12 AM
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Nov 2005
Location: Arnold, MO
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
**SOLD** 2001 Ram Air WS6 TA NBM Roller Year: 2001
Make: Pontiac
Model: Trans Am
Price: $3900
Mileage: 70000
Private or Dealer Listing: Private Listing
Location (State): MO
Color: Blue
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
Below are a few issues just as a heads up before anyone would make the trip to look at it.
-The DS headlight motor grinds; will include the brass gear to fix it. Still functions properly just an annoying sound.
-Windshield wipers have been removed. All brackets and wipers will be included but motor is bad. This was not an issue for me as I did not drive this car in the rain.
-The pigtail harness for the reverse lights was cut off to use with the auto shifter. A new one can be bought cheap.
-There is a 2 inch long slit in the driver’s seat with the intention of running the 5 point harness through the seat. It has been sealed up and never re-opened but if you look closely you can find the mark.
- The driver’s side rear quarter panel has a scratch that is shown in pics. In the 2 pics of the scratches look closely as the top line is a reflection of my truck's running boards. The scratch is the bottom line.
-I put a stock 10 bolt rear end with 3.23:1 gears so I could roll it around, but it is a 3 channel ABS and the car is set up as a 4 channel ABS
-I do not have a door key, just the key fob which has worked well.
I'm located in Arnold, MO 63010. Please PM me with any questions. Clean title in hand.
Please use the link below to view more pictures. Even with the issues listed, I'm still firm on the price. It's worth $3,900.
http://imageshack.us/g/1/10121482/
Last edited by Sweetred95ta; 05-22-2013 at 08:01 AM.
04-23-2013, 07:17 AM
#6
Launching!
Thread Starter
iTrader: (2)
Join Date: Nov 2005
Location: Arnold, MO
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
I do. After parting it out, I had to put a stock 10 bolt and kmember back in the car. I did that on Sunday (late), but wasn't able to get it cleaned up. Got the interior cleaned up last night. I hope to clean the exterior tonight and get some good pictures. As soon as I do, I'll upload some more pictures for everyone.
