1999 WS6 Forged 347/D1sc
10-08-2013, 02:09 PM
#1
Teching In
Thread Starter
Join Date: Apr 2013
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
1999 WS6 Forged 347/D1sc Year: 1999
Make: Pontiac
Model: Firebird
Price: $25000
Mileage: 48585
Private or Dealer Listing: Private Listing
Location (State): KS
Color: Black
Transmission: Manual
Drivetrain: Rear Wheel Drive
-48,xxx miles and in great condition.
-Forged Iron 5.3 347/AFR 205 65cc heads
-Built T56
-Moser 12 Bolt/33 spline axles/Auburn diff
-LPE HRE 3 piece Forged wheels
-D1sc Procharger with dual high flow intercoolers
-BMR Kmember
-BMR Panhard Bars
-Spohn Torque Arm
-Qa1's up front/Comp engineering out back.
-Custom 14" Brembo GT Big brake kit with CTS-V 4 piston calipers up front
-BBRC Pro touring stock location fuel cell with in tank MagnaFuel 750-4301 fuel pump, Magnafuel regulator, Aeromotive rails, fittings etc.
-72lb Mototron injectors
This car is very well maintained and drives great on the street. Made 602whp/544tq on a dynojet @ 12psi
Those are the main things and I know I am forgetting a lot. I have around 50K$ in receipts minus the cost of the car.
I am open to trades.
Last edited by LPE_WS6; 10-11-2013 at 02:25 PM.
10-11-2013, 02:05 PM
#3
Nice looking ride. I don't see any pics, did they load correctly. Also what compression is the motor, numbers seem tad low for a forged 347 @ 12 psi. Maybe its the stock dual ICs.
Thanks.
Thanks.
10-11-2013, 02:12 PM
#4
Teching In
Thread Starter
Join Date: Apr 2013
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
I believe 8.5:1 or 9:1 cr iirc i'd have to look, it's been very long. I can send pics to your phone if you'd like pm me your cell #. The dual ic's do not cool as well as a front mount would. Iat's are a bit higher because of this.