For Sale or Trade: Tastefully modified and FAST Pontiac GTO (10.16 @ 134.5)
10-17-2008, 02:19 PM
#1
10 Second Club
Thread Starter
Join Date: Dec 2004
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
For Sale or Trade: Tastefully modified and FAST Pontiac GTO (10.16 @ 134.5) Reposting thread with new title:
Less than 3K miles on the engine, trans, and driveline. About 40k on body. I am only considering selling or trading this beast right now since I am deploying again for a year in Jan and want to try something new, there is nothing wrong with the car.
Engine details (pump gas beast that you can DD all year):
416CI L92 (truck variant of LS3)
Forged internals
ETP 245 Heads
PatrickG Custom Cam
Details on the build with old cam can be found here (new cam dyno'd slightly higher): http://www.ls1gto.com/forums/showthread.php?t=234949
Nitrous System is a 90mm plate kit, the link above explains that as well. Stand alone fuel tank with race gas for security and a progressive controller. Basically as safe as it gets. Running a 200 shot resulted in a 10.16 @ 134.5 MPH.
Drive line is built to last, this Goat will take what you throw at it. 2 piece BOP HD shaft (chromoly/alum version). BMR CV Shafts and Stubs. Stock Gears etc...
Suspension: Pedders front and rear stock height springs and shocks. Drag Bags for when I run my Holeshots with 275 MT ET DR's with individual valves done up for each side for easy access. New pedders front hubs. Various Pedders bushings throughout but running stock sway bars. Pedders HD Endlinks. BMR Subframe connectors... Drives like a dream and cuts low 1.5 60's! Get some slicks and maybe you can hit a 1.49 60ft. Pedders strut tower brace...
Brakes: Upgraded the 04 brakes to the bigger and better 05/06 brakes with powerslot rotors front and rear.
Transmission is a FLT LVL 5 4L60E with Circle D 3800 Triple Disc converter. Trans and converter are as bullet proof as a 4L60 can get. No slipping on nitrous launches and it DD's great on the street. No super loose TC here. Has a tranny cooler already.
The paint is in like new condition except for a blemish on the rear bumper, regular wear on the front clip, and an unfortunate scratch on driver side from wifes purse...no dents I am aware of. I buff with an orbital and the paint really does look great....oh and rubber in wheel wells.
yes I track it at a 11.1 pace all motor and 10.16 pace on 200 shot.
Appearance: Has CF banshee hood, CF rear insert. This is a blue interior IBM with SCSS center gauge pod holding dual aeroforce gauges. Also have an SCSS A-pillar with pods holding fuel pressure and nitrous pressure gauges that match the blue interior. Also forgot it is running a JHP original lip spoiler and HID head lights.
Misc: Running a 5 point NHRA legal cage with 5 point harness already installed (stock belt remains). Only issue this causes is that you can't go with a gangsta low profile driving position. Also the way the cage was put together the rear seats are a no go...I asked for it like this because I never used the and just wanted to carpet the rear seating area. Also currently the passenger seat is out, but that is by choice, it can go back in. If you really don't want the cage someone can cut it out for cheap....but this Goat goes 11.1 on motor all day so you will need it if you go to the track. Almost forgot, it is running some CDT Eurosport 6.5" component speakers up front (pricey) and a single 10" sub in the rear. But fear not...it is all quick disconnect for when you got to the track.
Pics of cage: http://www.ls1gto.com/forums/showthr...highlight=cage
All motor/trans/driveline work done by Speed INC.
All who have seen it know how nice it is and that it is a true street machine. Runs pump gas.
Added benefit if you buy is I will throw in a copy of HP Tuners with the motor and nitrous tune ($4-500 value). And you have the option of buying 18" TSW Thruxtons and Holeshots (front and rear already fitted) separately.
$29k asking OBO or trade (TBD).
I have $30K invested on top of the price of this car.
Only cars I really want to trade for a modified WS6, C5Z, Termi Cobra, well maintained classic muscle...other cars would be considered.
Lots of folks can vouch for the quality of this car. This is the type of car you even have shipped to you from out of state...you can't duplicate the work done on this for $29K including the car itself.
Car is located in Racine Wisconsin (ZIP 53406).
Email for serious offers: miwarrior@gmail.com
Lots of pics here: http://s433.photobucket.com/albums/qq52/FastFLHX/GTO/
And video's: http://www.youtube.com/user/grendel602
[youtube]http://www.youtube.com/watch?v=uSkYyw4_pGk[/youtube]
Less than 3K miles on the engine, trans, and driveline. About 40k on body. I am only considering selling or trading this beast right now since I am deploying again for a year in Jan and want to try something new, there is nothing wrong with the car.
Engine details (pump gas beast that you can DD all year):
416CI L92 (truck variant of LS3)
Forged internals
ETP 245 Heads
PatrickG Custom Cam
Details on the build with old cam can be found here (new cam dyno'd slightly higher): http://www.ls1gto.com/forums/showthread.php?t=234949
Nitrous System is a 90mm plate kit, the link above explains that as well. Stand alone fuel tank with race gas for security and a progressive controller. Basically as safe as it gets. Running a 200 shot resulted in a 10.16 @ 134.5 MPH.
Drive line is built to last, this Goat will take what you throw at it. 2 piece BOP HD shaft (chromoly/alum version). BMR CV Shafts and Stubs. Stock Gears etc...
Suspension: Pedders front and rear stock height springs and shocks. Drag Bags for when I run my Holeshots with 275 MT ET DR's with individual valves done up for each side for easy access. New pedders front hubs. Various Pedders bushings throughout but running stock sway bars. Pedders HD Endlinks. BMR Subframe connectors... Drives like a dream and cuts low 1.5 60's! Get some slicks and maybe you can hit a 1.49 60ft. Pedders strut tower brace...
Brakes: Upgraded the 04 brakes to the bigger and better 05/06 brakes with powerslot rotors front and rear.
Transmission is a FLT LVL 5 4L60E with Circle D 3800 Triple Disc converter. Trans and converter are as bullet proof as a 4L60 can get. No slipping on nitrous launches and it DD's great on the street. No super loose TC here. Has a tranny cooler already.
The paint is in like new condition except for a blemish on the rear bumper, regular wear on the front clip, and an unfortunate scratch on driver side from wifes purse...no dents I am aware of. I buff with an orbital and the paint really does look great....oh and rubber in wheel wells.
yes I track it at a 11.1 pace all motor and 10.16 pace on 200 shot.Appearance: Has CF banshee hood, CF rear insert. This is a blue interior IBM with SCSS center gauge pod holding dual aeroforce gauges. Also have an SCSS A-pillar with pods holding fuel pressure and nitrous pressure gauges that match the blue interior. Also forgot it is running a JHP original lip spoiler and HID head lights.
Misc: Running a 5 point NHRA legal cage with 5 point harness already installed (stock belt remains). Only issue this causes is that you can't go with a gangsta low profile driving position. Also the way the cage was put together the rear seats are a no go...I asked for it like this because I never used the and just wanted to carpet the rear seating area. Also currently the passenger seat is out, but that is by choice, it can go back in. If you really don't want the cage someone can cut it out for cheap....but this Goat goes 11.1 on motor all day so you will need it if you go to the track. Almost forgot, it is running some CDT Eurosport 6.5" component speakers up front (pricey) and a single 10" sub in the rear. But fear not...it is all quick disconnect for when you got to the track.
Pics of cage: http://www.ls1gto.com/forums/showthr...highlight=cage
All motor/trans/driveline work done by Speed INC.
All who have seen it know how nice it is and that it is a true street machine. Runs pump gas.
Added benefit if you buy is I will throw in a copy of HP Tuners with the motor and nitrous tune ($4-500 value). And you have the option of buying 18" TSW Thruxtons and Holeshots (front and rear already fitted) separately.
$29k asking OBO or trade (TBD).
I have $30K invested on top of the price of this car.
Only cars I really want to trade for a modified WS6, C5Z, Termi Cobra, well maintained classic muscle...other cars would be considered.
Lots of folks can vouch for the quality of this car. This is the type of car you even have shipped to you from out of state...you can't duplicate the work done on this for $29K including the car itself.
Car is located in Racine Wisconsin (ZIP 53406).
Email for serious offers: miwarrior@gmail.com
Lots of pics here: http://s433.photobucket.com/albums/qq52/FastFLHX/GTO/
And video's: http://www.youtube.com/user/grendel602
[youtube]http://www.youtube.com/watch?v=uSkYyw4_pGk[/youtube]
Trending Topics
11-11-2008, 08:01 PM
#8
10 Second Club
Thread Starter
Join Date: Dec 2004
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Beast is still available and currently located in Manhattan Kansas.
It is a DD beast....drove from Milwaukee to KS with ZERO issues and 19.1 MPG cruising at 85 MPH most of the way.
It is a DD beast....drove from Milwaukee to KS with ZERO issues and 19.1 MPG cruising at 85 MPH most of the way.
11-16-2008, 08:24 PM
#14
Teching In
Join Date: Feb 2008
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
I've got a 1969 Plymouth Satellite-Roadrunner clone that is fully restored. 440 3 speed reverse Manual valve body, gear driven, cam, ported heads. The guy I bought it from owns a body shop and did all the work right, custom orange with a black top. He ran it once to a 12.0 on motor, he put a nitrous system on it but has never been used. I sold the drag radials and put some street tires on it, car has been babied. All my friends have Camaros I'm out of place wanting something more street friendly to go cruising and long distances.
