LS1 Roller
#1
Launching!
Thread Starter
iTrader: (39)
Join Date: Mar 2005
Location: Michigan
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
LS1 Roller
The car is a 1994 Camaro Z28, that being said the only parts that were made in 94 is all of the body parts minus the doors, t-tops, and hatch. The radiator, heating/cooling systems, rearend, suspension, brake system, fuel system, all computers and wiring, and full interior is from a 2001 Camaro SS. 125K on the 94 parts, 64K on the 01 parts and less than 15K on performance mods.
The body is black with some scratches and nicks, The front passenger fender has some peeling clear coat. The engine bay is painted Ruri blue as my intentions were to repaint the car. The paint can be included if the buyer so chooses.
1994 Camaro Z28 M6 Body, Completely setup to run a LS1
Clean Title
BCM, Wiring harness
LS1 Radiator and Condenser
Dynamat Sound Deadener from the firewall to the rear seats
SLP Line Lock
LS1 Brakes and Lines, Includes booster, master cylinder, ABS block
LS1 Fuel Lines, Plastic Gas tank, 255 lph in-tank pump
Stock Z28 hood
2001 SS Suspension - Struts, Shocks, Springs, Front/Rear Sway Bars, Rear Jounce Spacers, K-Member, Steering Rack and Steering Wheel
Stock Torque Arm
Boxed Lower Control Arms
Two-way Adj. Pan hard Rod
01 SS Rear End - Discs, 4 Channel ABS, TCS, LSD, Motive 3.73’s, LG Motorsports G2 Cover.
Salad Shooter Wheels with 75% tread all around
2001 Camaro Ebony Leather interior w/ A4 center console
Steering Wheel Controls
No Gauge Cluster - Went with engine and trans for mileage purposes
Power Driver Seat
Keyless Entry
PW Locks, Window, Mirrors
Boxed Lower Control Arms
All windows tinted 50%
NEW Pictureshttp://s85.photobucket.com/albums/k8.../LS1%20Roller/
READ ME: The SS hood and SS Spoiler are are available to work into the deal. The stock Z28 hood will come with it also and I have another hatch with a Z28 spoiler.
OLD Pictures: http://s85.photobucket.com/albums/k8...hed/?start=all
$3000 OBO, Read Post #22 For Lower Price, Will take out the interior or other things to reduce the price. My plans have changed and I am moving onto a different vehicle. I will not pick it apart unless I have a definite buyer for all parts.
I am posting this in here because people look in here for a roller more than in the Parts Classified section. If this is not OK Mods then please remove it.
The body is black with some scratches and nicks, The front passenger fender has some peeling clear coat. The engine bay is painted Ruri blue as my intentions were to repaint the car. The paint can be included if the buyer so chooses.
1994 Camaro Z28 M6 Body, Completely setup to run a LS1
Clean Title
BCM, Wiring harness
LS1 Radiator and Condenser
Dynamat Sound Deadener from the firewall to the rear seats
SLP Line Lock
LS1 Brakes and Lines, Includes booster, master cylinder, ABS block
LS1 Fuel Lines, Plastic Gas tank, 255 lph in-tank pump
Stock Z28 hood
2001 SS Suspension - Struts, Shocks, Springs, Front/Rear Sway Bars, Rear Jounce Spacers, K-Member, Steering Rack and Steering Wheel
Stock Torque Arm
Boxed Lower Control Arms
Two-way Adj. Pan hard Rod
01 SS Rear End - Discs, 4 Channel ABS, TCS, LSD, Motive 3.73’s, LG Motorsports G2 Cover.
Salad Shooter Wheels with 75% tread all around
2001 Camaro Ebony Leather interior w/ A4 center console
Steering Wheel Controls
No Gauge Cluster - Went with engine and trans for mileage purposes
Power Driver Seat
Keyless Entry
PW Locks, Window, Mirrors
Boxed Lower Control Arms
All windows tinted 50%
NEW Pictureshttp://s85.photobucket.com/albums/k8.../LS1%20Roller/
READ ME: The SS hood and SS Spoiler are are available to work into the deal. The stock Z28 hood will come with it also and I have another hatch with a Z28 spoiler.
OLD Pictures: http://s85.photobucket.com/albums/k8...hed/?start=all
$3000 OBO, Read Post #22 For Lower Price, Will take out the interior or other things to reduce the price. My plans have changed and I am moving onto a different vehicle. I will not pick it apart unless I have a definite buyer for all parts.
I am posting this in here because people look in here for a roller more than in the Parts Classified section. If this is not OK Mods then please remove it.
Last edited by 2SLO4ME; 02-24-2009 at 12:30 PM. Reason: SS Hood and SS Spoiler Available
Trending Topics
#10
Launching!
Thread Starter
iTrader: (39)
Join Date: Mar 2005
Location: Michigan
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
All you need is a engine, trans, PCM & Harness and a Driveshaft and she is ready to go. that is all I took out of it.
To sweeten the deal for an extra $750 I'll throw in Some TTS Long tube headers that need recoating with a 2.5" off road Y with 2 2.5 cutouts and a SLP Dual/Dual System. This option is only available to the purchaser and will not be sold separate, otherwise I will be keeping it.
To sweeten the deal for an extra $750 I'll throw in Some TTS Long tube headers that need recoating with a 2.5" off road Y with 2 2.5 cutouts and a SLP Dual/Dual System. This option is only available to the purchaser and will not be sold separate, otherwise I will be keeping it.
Last edited by 2SLO4ME; 02-07-2009 at 03:14 PM.
#11
Launching!
Thread Starter
iTrader: (39)
Join Date: Mar 2005
Location: Michigan
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Someone throw me an offer, I'm sure we can work a deal... I don't want this sitting for to long. If anyone has questions about this roller, even if your not buying it, just ask.
#15
Launching!
Thread Starter
iTrader: (39)
Join Date: Mar 2005
Location: Michigan
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Shoot me some offer guys/gals. Willing to work a deal, because right now it is taking up space. it is now OBO.
A front end swap wouldn't be hard if your looking for the newer style since the harness for the lights is from the 01 SS too.
A front end swap wouldn't be hard if your looking for the newer style since the harness for the lights is from the 01 SS too.