2000 Turbo Camaro Z28
#1
Launching!
Thread Starter
iTrader: (3)
Join Date: Feb 2004
Location: Hawaii
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
(Price Lowered)2000 Turbo Camaro Z28
The car Is In great shape with minor scratch on spoiler and some small rockchips In hood.The ashtray door Is broke,but the car Is complete and done wright.The only thing left to do Is run the chargepipe from the turbo to the throttlebody.This Is an STS kit but the stock chargepipe was removed because It was way to small for the 88mm turbo outback.The a/c compressor and the condensor needs to be put back on,It was removed when the motor was put In and I do have It.I travel to much for work and don't have time to work on the car and not to mention going through a divorce doesn't help.
The odometer says 36xxx miles but doesn't work anymore after puting the tranny In last year.But the car has only benn driven maybe 700 miles since then.It hasnt been liscenes since the plates expired last August.So the motor and tranny have around 700 miles on them.
Specs:
408 From AMS Raceing Engines
Lunati 21cc dish pistons
Manley H-beam rods
Eagle 4340 crank
Total Seal file fit rings
Clevite bearings
ARP rod bolts
Ported ls6 oilpump
Double roll timeing chain
Speed inc cam 225/225 581/581/ 113lsa
Ls6 intake
Dart 225 heads ported & polished to the max by local shop
Patriot Extreme valvesprings
Stock polished throttle body
Dual Walbro Intake 225 pumps
Speed Inc fuelpressure reg.
Speed Inc. fuelrails
Acceleronics 96lb. inj
Acceleronics driver box
Lingenfelter 2-step
Speed Inc. adjustable tensioner pulley
TH-400 tranny
PTC converter
Reverse manual valvebody
Deep aliminum pan with drain
Rebuilt with Raptors top of the line kit
3.5in. aluminum driveshaft
Stock 10bolt 3.42 gears(I no I no)
Moser axles
Auburn Pro Diff.
Aluminum Girdle
QA1 12 way shocks up front
Stock shocks In back
Airbag on passengerside
BMR Adjustable torque arm
BMR Adjustable panhard bar
Weld Prostar Wheels
15x3.5 With Mickey Thompson Front Runners
15x8 With Hoosier Quick Time Pros 27x11.5
Tires look almost brand new
Autometer boost guage
Autometer fuelpressure guage
AEM wideband
FMIC
Almost new Garrett 88mm turbo
Exhaust houseing Is coated
Stock Manifolds
Cat delete pipes
Exhaust is completely wrapped
Im sure I have forotten something so just ask and thanks for looking.It has the waste gate installed already and comes with the bov and 3-bar map sensor with harness.
Asking $15,000 o.b.o Make offers guys this needs to go.
The odometer says 36xxx miles but doesn't work anymore after puting the tranny In last year.But the car has only benn driven maybe 700 miles since then.It hasnt been liscenes since the plates expired last August.So the motor and tranny have around 700 miles on them.
Specs:
408 From AMS Raceing Engines
Lunati 21cc dish pistons
Manley H-beam rods
Eagle 4340 crank
Total Seal file fit rings
Clevite bearings
ARP rod bolts
Ported ls6 oilpump
Double roll timeing chain
Speed inc cam 225/225 581/581/ 113lsa
Ls6 intake
Dart 225 heads ported & polished to the max by local shop
Patriot Extreme valvesprings
Stock polished throttle body
Dual Walbro Intake 225 pumps
Speed Inc fuelpressure reg.
Speed Inc. fuelrails
Acceleronics 96lb. inj
Acceleronics driver box
Lingenfelter 2-step
Speed Inc. adjustable tensioner pulley
TH-400 tranny
PTC converter
Reverse manual valvebody
Deep aliminum pan with drain
Rebuilt with Raptors top of the line kit
3.5in. aluminum driveshaft
Stock 10bolt 3.42 gears(I no I no)
Moser axles
Auburn Pro Diff.
Aluminum Girdle
QA1 12 way shocks up front
Stock shocks In back
Airbag on passengerside
BMR Adjustable torque arm
BMR Adjustable panhard bar
Weld Prostar Wheels
15x3.5 With Mickey Thompson Front Runners
15x8 With Hoosier Quick Time Pros 27x11.5
Tires look almost brand new
Autometer boost guage
Autometer fuelpressure guage
AEM wideband
FMIC
Almost new Garrett 88mm turbo
Exhaust houseing Is coated
Stock Manifolds
Cat delete pipes
Exhaust is completely wrapped
Im sure I have forotten something so just ask and thanks for looking.It has the waste gate installed already and comes with the bov and 3-bar map sensor with harness.
Asking $15,000 o.b.o Make offers guys this needs to go.
Last edited by vandal0-0; 03-12-2009 at 10:18 AM.